- Open Access
A highly efficient green synthesis of 1, 8-dioxo-octahydroxanthenes
© Ilangovan et al 2011
- Received: 8 September 2011
- Accepted: 8 December 2011
- Published: 8 December 2011
SmCl3 (20 mol%) has been used as an efficient catalyst for reaction between aromatic aldehydes and 5,5-dimethyl-1,3-cyclohexanedione at 120°C to give 1,8-dioxo-octahydroxanthene derivatives in high yield. The same reaction in water, at room temperature gave only the open chain analogue of 1,8-dioxo-octahydroxanthene. Use of eco-friendly green Lewis acid, readily available catalyst and easy isolation of the product makes this a convenient method for the synthesis of either of the products.
- Lewis Acid
- General Experimental Procedure
- Allylic Alcohol
1,8-dioxo-octahydroxanthenes are important class of oxygen heterocycle in which a phenyl substituted pyran ring is fused on either side with two cyclohexenone rings. Presence of conjugated bis-dienone functionality makes these compounds sensitive to attack by nucleophiles and light energy. In the recent past, there is a renewed interest in the synthesis of this class of compounds as number of its applications increased, both in the field of medicinal chemistry and material science. 1,8-dioxo-octahydroxanthenes shows useful biological activities such as anti-inflammatory, antibacterial, antiviral activities , finds use in biodegradable agrochemicals [2, 3], cosmetics and pigments , fluorescent materials , photodynamic therapy , luminescent sensors , and in laser technologies . The formation of intermediate, 2,2'-arylmethylenebis(3-hydroxy-5,5-dimethyl-2-cyclohexene-1-one), in the synthesis of 1,8-dioxo-octahydroxanthenes can take place even without a catalyst . However, there is always need for a catalyst in the cyclization step to get the cyclized compound [9–12]. A variety of reagents, mainly acids, have been employed to accomplish this transformation [11, 13–27]. However many of these reagents has its own disadvantages, such as use of expensive reagents, high catalyst loading and low yield.
On exposure to water, conventional Lewis acids such as AlCl3, ZnCl2, BCl3 etc., decomposes whereas lanthanide Lewis acids shows high hydrolytic stability. In fact, several organic reactions catalysed by lanthanide Lewis acids are carried out in water . The catalysts can be recovered and reused without loss of much activity, thus considered to be green Lewis acids. SmCl3 is one of the readily available inexpensive Lewis acids which is ranked as "hard" according to the hard soft acids and bases (HSAB) concept . SmCl3 is an excellent catalyst used in several important organic transformations such as selective removal of acid sensitive protecting groups like Boc, THP and TBDMS in the presence of one another , C-acylation of 1, 3-dicarbonyl compounds and malononitrile , and in the formation of ether from allylic alcohols . SmCl3 is also used in electro reductive alkylation of ketones  and cleavage of allyl ethers . Considering that there is a need for the use of more useful greener acid catalyst we examined SmCl3, a water resistant, reusable, lanthanide Lewis acid for the synthesis of 1,8-dioxo-octahydroxanthenes. Here in we report a highly efficient and clean synthesis of 1,8-dioxo-octahydroxanthenes using SmCl3.
Optimisation of condition for reaction between dimedone and 4-NO2-benzaldehyde in the presence of SmCl3
SmCl3 mol %
Yield b %
SmCl3 catalysed synthesis of 9-aryl-3,4,5,6,7,9-hexahydro-2H-xanthene-1,8-dione derivatives or its open chain form
Melting Point°C (3)
Melting Point°C (4)
3-NO2- C6H5- (1c)
C6H5CH = CH-(1o)
In case of formation of open chain compounds 3a to 3o, irrespective of whether it has electron donating or withdrawing substituents on the aromatic ring all the starting materials underwent reaction within 30 min. However, wide difference in reaction rate could be observed, in the formation of xanthenediones 4a to 4m. Among the different nitro benzaldehydes studied, 4-nitro-benzaldehyde (1d) underwent reaction faster (8 h) compared to 3-nitro-benzaldehyde (1c, 10 h, entry 3) and 2-nitro-benzaldehyde (1b, 13 h) to give the product 4b, 4c and 4d respectively. Steric hindrance of the 2-nitro group may the reason for slow reaction rate. In case of halo substituted benzaldehydes 1e-1g, the mesomerically electron donating character was predominant hence the reaction took place fast (entry 5, 6 and 7) compared to substrates with electron withdrawing substituents.
The effect of 4-CH3 substituent was so mild that the 4-CH3-benzaldehyde (1h) did not make any difference in reaction rate (entry 8, 5 h) compared to unsubstituted benzaldehyde (1a). In case of benzaldehydes 1i and 1j (entry 9, and 10), containing just one electron donating substituent, the rate of reaction was fast compared to compounds with electron withdrawing substituents. A significant increase in the rate of the reaction could be observed when more than one electron donating groups (entry 11, 12 and 13) are present. The reaction condition was tolerant to ether, phenolic -OH group.
In case of furfuraldehyde (1n) and cinnamaldhyde (1o) the open chain compounds 3n and 3o were obtained in excellent yield where as the corresponding cyclised products 4n and 4o was obtained only in minor quantity along with a mixture of side products. In order to improve the yield of cyclised products 4n and 4o, different reaction conditions were tried by varying the quantity of the catalyst from 20 mol % to 100 mol % and the reaction temperature from ambient to 85°C. None of the reaction conditions gave better result. Polymerisable nature of the furyl ring and cinnamoyl group may be the reason for low yield of the product. Spectral data and melting point observed for all the products were comparable with data reported in the literature (please check additional files 1 and 2).
Comparison of the efficiency of catalysts reported for the synthesis of 14-(4-nitrophenyl)-14H-dibenzo [a, j] xanthenes and SmCl3
General Procedure for the Preparation of 2, 2'-aryl/alkylmethylene bis (3-hydroxy-5, 5- dimethyl-2-cyclohexene-1-one) (3)
To a mixture of an aldehyde (1 mole) and 5, 5-dimethyl-1,3-cyclohexanedione (2 mole) in water SmCl3, (10 mol%) was added and stirred at ambient temperature, till the reaction goes to completion. Progress of the reaction was monitored by TLC (Silica gel, 9:1, Hexane:EtOAc). After completion of the reaction, the solid separated was filtered, washed with water and dried to get the product.
General Procedure for the Preparation of 3,3,6,6-Tetramethyl-9-aryl-3,4,5,6,7,9-hexahydro-2H-xanthene-1,8-dione (4)
To a solution of an aldehyde (1 mole) and 5,5-dimethyl-1,3-cyclohexanedione (2 mole), SmCl3 (20 mol%) was added and stirred at 120°C. The progress of the reaction was monitored by TLC (Silica gel, 7:3, Hexane:EtOAc). After completion of the reaction it was cooled to room temperature and water (5 mL) was added, solid separated was filtered washed with water (5 mL) and dried under vacuum to get the desired xanthandione derivative. The combined aqueous layer was washed with EtOAc to remove any other organic impurities, concentrated and dried under vacuum at 120°C for 2 h to recover the catalyst in almost quantitative yield.
1. 2, 2'-(4-nitrophenylmethylene)bis(3-hydroxy-5,5- dimethyl-2-cyclohexene-1-one) (3d)
The reaction was carried out according to the general experimental procedure using 4-nitrobenzaldehyde (100 mg, 0.0006 mole), 5,5-dimethyl-1,3-cyclohexanedione (170 mg, 0.0013 mole) and SmCl3 (16.9 mg, 10 mol%) in water (1 mL). Conditions: room temperature, 30 minutes. The title compound 3d was obtained (251 mg, 91%) as a solid. The spectral data for the compound 3d was in agreement with the values already reported in the literature .
Mp: 194-196°C. 1H NMR (400 MHz, CDCl3): δ 1.04 (s, 6H, 2 × CH3), 1.16 (s, 6H, 2 × CH3), 2.24-2.44 (m, 8H, 4 × CH2), 5.57 (s, 1H, CH), 7.03-7.51 (m, 4H, Ar), 11.87 (s, 1H, OH).
2. 2,2'-(4-methoxyphenylmethylene)bis(3-hydroxy-5,5-dimethyl-2-cyclohexene-1-one) (3i)
The reaction was carried out according to the general experimental procedure using 4-methoxybenzaldehyde (100 mg, 0.0007 mole), 5,5-dimethyl-1,3-cyclohexanedione (188 mg, 0.0014 mole) and SmCl3 (18.8 mg, 10 mol%) in water (1 mL). Conditions: room temperature, 30 minutes. The title compound 3i was obtained (242 mg, 82%) as a solid. The spectral data for the compound 3i was in agreement with the values already reported in the literature .
Mp:146-148°C. 1H NMR (400 MHz, CDCl3): δ 1.02 (s, 6H, 2 × CH3), 1.15 (s, 6H, 2 × CH3), 2.21-2.40 (m, 8H, 4 × CH2), 3.70 (s, 3H, OCH3), 5.41 (s, 1H, CH), 6.75 (d, J = 8.8 Hz, 2H, Ar), 6.93 (d, J = 8.0 Hz, 2H, Ar), 11.84 (s, 1H, OH).
3. 3,3,6,6-tetramethyl-9-(4-nitrophenyl)-3,4,5,6,7,9-hexahydro-1H-xanthene-1,8(2H)-dione (4d)
The reaction was carried out according to the general experimental procedure using 4-nitrobenzaldehyde (100 mg, 0.0006 mole), 5,5-dimethyl-1,3-cyclohexanedione (170 mg, 0.0013 mole) and SmCl3 (33.9 mg, 20 mol%). Conditions: 120°C, 8 h. The title compound 4d was obtained (257 mg, 97%) as a solid. The spectral data for the compound 4d was in agreement with the values already reported in the literature . Mp: 225-226°C. The same reaction was repeated with the recovered catalyst for four times to get 97%, 96%, 96% and 96% of the product.
1H NMR (400 MHz, CDCl3): δ 0.99 (s, 6H, 2 × CH3), 1.11 (s, 6H, 2 × CH3), 2.18 (q, J = 19.6 Hz, 4H, 2 × CH2), 2.49 (s, 4H, 2 × CH2), 4.82 (s, 1H, CH), 7.47(d, J = 19.6 Hz, 2H, Ar), 7.47 (d, J = 5.2 Hz, 2H, Ar).
4. 9-(4-hydroxyphenyl)-3,3,6,6-tetramethyl-3,4,5,6,7,9-hexahydro-1H-xanthene-1,8(2H)-dione (4j)
The reaction was carried out according to the general experimental procedure using 4-hydroxybenzaldehyde (100 mg, 0.0008 mole), 5,5-dimethyl-1,3-cyclohexanedione (210 mg, 0.0016 mole) and SmCl3 (42 mg, 20 mol%). Conditions: 120°C, 9 h. The title compound 4j was obtained (298 mg, 98%) as a solid. The spectral data for the compound 4j was in agreement with the values already reported in the literature . Mp: 244-246°C. 1H NMR (400 MHz, CDCl3): δ 0.99 (s, 6H, 2 × CH3), 1.09 (s, 6H, 2 × CH3), 2.21 (q, J = 8.8 Hz, 4H, 2 × CH2), 2.45 (s, 4H, 2 × CH2), 4.67 (s, 1H, CH), 6.61 (d, J = 8 Hz, 2H, Ar), 7.11 (d, J = 8 Hz, 2H, Ar).
In conclusion, SmCl3, a water resistant Lewis acid was used for the synthesis of 3,3,6,6-tetramethyl-9-aryl-3,4,5,6,7,9-hexahydro-2H-xanthene-1,8-dione derivatives or its open chain analogue depending upon the reaction condition. Water was used as the green solvent, and the catalyst could be recovered and reused. The reaction work up is very simple, solid separated from the reaction mixture was filtered washed with water to recover the catalyst and dried to get the desired xanthenedione derivatives. This procedure offers several advantages such as use of inexpensive green catalyst, operational simplicity, cleaner reaction and minimal environmental impact, high yield, thus making it one of the attractive and practical protocols for the synthesis of xanthenediones. Further studies on the use of xanthenediones as visible light sensitizers and as better excited state electron donors to TiO2 for application in dye sensitised solar cells are in progress.
Council of Scientific and Industrial Research (CSIR), New Delhi is gratefully acknowledged for financial support (Grant No.: 80(0067)/07/EMR-II, dt. 02-11-2007) and Senior Research Fellowship to SM. We are grateful to the DST-FIST for the use of 400 MHz NMR facility at the School of Chemistry, Bharathidasan University.
- Hatakeyma S, Ochi N, Numata H, Takano S: A new route to substituted 3-methoxycarbonyldihydropyrans: Enantioselective synthesis of (-)-methyl elenolate. J Chem Soc, Chem Commun. 1988, 1202-1204.Google Scholar
- Hafez EAA, Elnagdi MH, Elagamey AGA, El-Taweel FMAA: Nitriles in heterocyclic Synthesis: novel Synthesis of benzo[c]coumarin and of benzo[c]pyrano [3,2-c]quinoline derivatives. Heterocycles. 1987, 26: 903-907. 10.3987/R-1987-04-0903.View ArticleGoogle Scholar
- Abdel Galil FM, Riad BY, Sherif SM, Elnagdi MH: Activated nitriles in heterocyclic synthesis: A novel synthesis of 4-azoloyl -2-Amino quinzolines. Chem Lett. 1982, 1123-1126.Google Scholar
- Ellis GP: The chemistry of heterocyclic compounds. Chromene, Chromanes and Chromone. Edited by: Weissberger A, Taylor ECE. 1977, John Wiley: New York, 2: 13-Google Scholar
- Callan JF, De Silva P, Magri DC: Luminescent sensors and switches in the early 21st century. Tetrahedron. 2005, 61: 8551-8588. 10.1016/j.tet.2005.05.043.View ArticleGoogle Scholar
- Sirkecioglu O, Talinli N, Akar A: Chemical aspects of santalin as a histological stain. J Chem Res (S). 1995, 502-Google Scholar
- Poupelin JP, Saint-Rut G, Foussard-Blanpin O: Synthesis and antiinflammatory properties of bis(2-hydroxy-1-naphthyl)methane derivatives. I. Monosubstituted derivatives. Eu J Med Chem. 1978, 13: 67-71.Google Scholar
- Banerjee A, Mukherjee AK: Chemical aspects of santalin as ahistological stain. Stain Technol. 1981, 56: 83-85.View ArticleGoogle Scholar
- Jin TS, Zang JS, Wang AQ, Li TS: Solid - state condensation reactions between aldehyde and 5,5- dimethyl 1,3-cyclohexanedione by grinding at room temperature. Synth Commun. 2005, 35: 2339-2345. 10.1080/00397910500187282.View ArticleGoogle Scholar
- Shi DQ, Wang YH, Lu ZS, Dai GY: Condensation of aromatic aldehydes with acidic methylene compounds without catalyst. Synth Commun. 2000, 30: 713-726. 10.1080/00397910008087374.View ArticleGoogle Scholar
- Jin TS, Zang JS, Xiao JC, Wang AQ, Li TS: Clean Synthesis of 1,8-Dioxo-octahydroxanthene Derivatives Catalyzed by p-Dodecyl benezenesulfonic Acid in aqueous Media. Synlett. 2004, 866-870.Google Scholar
- Das B, Thirupathi P, Reddy KR, Ravikanyh B, Nagarapu L: An efficient synthesis of1,8 dioxooctahydroxanthenes using heterogeneous catalyst. Catal Commun. 2007, 8: 535-538. 10.1016/j.catcom.2006.02.023.View ArticleGoogle Scholar
- Khosropour AR, Khodaei MM, Moghannian H: A Facile, Simple and convenient method for the Synthesis of 14-Alkyl or Aryl-14-H-Dibenzo[a, j]xanthenes Catalyzed by pTSA in Solution and Solvent-Free Conditions. Synlett. 2005, 955-958.Google Scholar
- Bhattacharya AK, Rana KC: Microwave assisted synthesis of 14-aryl-14H-dibenzo[a.j]xanthenes catalyzed by methanesulphonic acid under solvent free condition. Mendeleev Common. 2007, 17: 247-248. 10.1016/j.mencom.2007.06.023.View ArticleGoogle Scholar
- Rajitha B, Kumar BS, Reddy YT: Sulfamic acid: A novel and efficient catalyst for the synthesis of aryl 14H dibenzo[a.j]xanthenes under conventional heating and microwave irradiation. Tetrahedron Lett. 2005, 46: 8691-8693. 10.1016/j.tetlet.2005.10.057.View ArticleGoogle Scholar
- Das B, Thirupathi P, Mahender I: Amberlyst-15: An efficient reusable heterogeneous catalyst for the synthesis of 1,8-dioxo-octahydroxanthenes and 1,8-dioxo-decahydroacridines. J Mol Catal A: Chem. 2006, 247: 233-239. 10.1016/j.molcata.2005.11.048.View ArticleGoogle Scholar
- Saini A, Kumar S, Sandhu JS: A new LiBr-catalyzed, facile and efficient method for the synthesis of 14-alkyl or aryl 14H dibenzo[a, j] and Tetrahydrobenzo [b] pyrans under solvent-free conventional and microwave heating. Synlett. 2006, 1928-1932.Google Scholar
- Nagarapu L, Baseeruddin M, Kumari NV: Efficient Synthesisof Aryl 14-H- dibenzo [a.j]xanthenes using NaHSO4SiO2 or 5% WO3/ZrO2 as heterogeneous catalysts under conventional heating in a solvent-free media. Synth Commun. 2007, 37: 2519-2525. 10.1080/00397910701462658.View ArticleGoogle Scholar
- Dabiri M, Baghbanzadeh M, Shakouri Nikcheh M: Eco-friendly and efficient one-pot synthesis of alkyl- or aryl-14H-dibenzo [a, j] xanthenes in water. Bioorg Med Chem Lett. 2008, 18: 436-438. 10.1016/j.bmcl.2007.07.008.View ArticleGoogle Scholar
- Darviche F, Balalaie S, Chadegani F: Diammonium hydrogen phosphate as a neutral and efficient catalyst for synthesis of 1,8-dioxo-octahydroxanthene derivatives in aqueous media. Synth Commun. 2007, 37: 1059-1066. 10.1080/00397910701196520.View ArticleGoogle Scholar
- Venkatesan K, Pujari SS, Lahoti RJ: An efficient synthesis of 1,8-dioxo-octahydro-xanthene derivatives promoted by a room temperature ionic liquid at ambient conditions under ultrasound irradiation. Ultrason Sonochem. 2008, 15: 548-553. 10.1016/j.ultsonch.2007.06.001.View ArticleGoogle Scholar
- Kumari P, Yathindranath V, Chauhan SMS: Facile and efficient synthesis of 14-alkylor aryl-14-H-dibenzo[a, j]xanthenes using sulfonic-functionalized ionic liquids. Synth Commun. 2008, 38: 637-648. 10.1080/00397910701798234.View ArticleGoogle Scholar
- Bigdeli MA, Heravi MM, Mahdavinia GH: Silica supported Perchloric acid (HClO4-SiO2): A mild, reusable and highly efficient heterogeneous catalyst for the synthesis of 14-aryl or alkyl-14-H-dibenzo[a, j]xanthenes. J Mol Catal A: Chem. 2007, 275: 25-29. 10.1016/j.molcata.2007.05.007.View ArticleGoogle Scholar
- Kantevari S, Bantu R, Nagarapu L: HClO4-SiO2 and PPA-SiO2 catalyzed efficient one pot Knoevenagel condensation, Michael addition and cyclo dehydration of dimedone and aldehydes in acetonitrile, aqueous and solvent free conditions: scope and limitations. J Mol Catal A: Chem. 2007, 269: 53-57. 10.1016/j.molcata.2006.12.039.View ArticleGoogle Scholar
- Su W, Yang D, Jin C: Yb(OTf)3 catalyzed condensation reaction of β-naphthol and aldehyde in ionic liquids: a green synthesis of aryl-14H-dibenzo[a, j]xanthenes. Tetrahedron Lett. 2008, 49: 3391-3394. 10.1016/j.tetlet.2008.03.124.View ArticleGoogle Scholar
- Kim BS: Efficient synthesis of xanthene derivatives utilizing ytterbium(III) triflate. J Korean Chem Soc. 2007, 51: 298-300.View ArticleGoogle Scholar
- Fan XS, Li YZ, Zhang XY: InCl3·4H2O-promoted green preparation of xanthenedione derivatives in ionic liquids. Can J Chem. 2005, 83: 16-20. 10.1139/v04-155.View ArticleGoogle Scholar
- Kobayashi S, Sugiura M, Kitagawa H, Lam WW: Rare-Earth Metal Triflates in Organic Synthesis. Chem Rev. 2002, 102: 2227-2302. 10.1021/cr010289i.View ArticleGoogle Scholar
- Molander GA, Dowdy ED: Lanthanide and Group 3 Metallocene Catalysis in Small Molecule Synthesis. Chemistry and Use in Organic Synthesis. Edited by: Shu Kobayashi. 1999, Berlin, Springer-Verlag, 119-154.Google Scholar
- Gopinath P, Nilaya S, Muraleedharan KM: Highly chemoselective esterification reactions and Boc/THP/TBDMS discriminating deprotections under Samarium(III) Catalysis. Org Lett. 2011, 13: 1932-1935. 10.1021/ol200247c.View ArticleGoogle Scholar
- Shen Q, Huang W, Wang J, Zhou X: SmCl3-catalyzed C-acylation of 1, 3-dicarbonyl compounds and malononitrile. Org Lett. 2007, 9: 4491-4494. 10.1021/ol701961z.View ArticleGoogle Scholar
- Ouertani M, Collin J, Kagan HB: Ether formation from allylic alcohols catalyzed by samarium trichloride. Tetrahedron. 1985, 41: 3689-3693. 10.1016/S0040-4020(01)91389-4.View ArticleGoogle Scholar
- Hebri H, Duñach E, Périchon J: SmCl3-catalyzed electrochemical reductive allylation of ketones. Tetrahedron Lett. 1993, 34: 1475-1478. 10.1016/S0040-4039(00)60322-2.View ArticleGoogle Scholar
- Espanet B, Duñach E, Périchon J: SmCl3-catalyzed electrochemical cleavage of allyl ethers. Tetrahedron Lett. 1992, 33: 2485-2488. 10.1016/S0040-4039(00)92221-4.View ArticleGoogle Scholar
- Jin TS, Wang AQ, Ma H, Zhang JS, Li TS: The reaction of aromatic aldehydes and 5,5 -dimethyl 1,3 -cyclohexandione under solvent free grinding conditions. Indian J Chem Sec B. 2006, 45B: 470-474.Google Scholar
- Li JJ, Xu-Ye , Tao XY, Zhang ZH: An effective bismuth trichloride-catalyzed synthesis of 1,8-dioxo-octahydroxanthes. Phosphorus, Sulfur Silicon Relat Elem. 2008, 183: 1672-1678. 10.1080/10426500701724530.View ArticleGoogle Scholar
- Yu JJ, Wang LM, Liu JQ, Guo FL, Liu Y, Jiao N: Synthesis of tetraketones in water and under catalyst-free conditions. Green Chem. 2010, 12: 216-219. 10.1039/b913816a.View ArticleGoogle Scholar
- Lu H, Li J, Zhang Z: ZrOCl2 .8H2O a highly efficient catalyst for the synthesis of 1,8-dioxo-octahydroxanthene derivatives under solvent- free conditions. Appl Organometal Chem. 2009, 23: 165-169. 10.1002/aoc.1488.View ArticleGoogle Scholar
- Karade HN, Sathe M, Kaushik MP: An efficient synthesis of 1,8-dioxo-octahydroxanthenes using tetrabutylammoniun hydrogen sulfate. Arkivoc. 2007, 252-258. xiiGoogle Scholar
- Shujiang Tu S, Zhou J, Lu Z, Deng X, Shi D, Wang S: Condensation of aromatic aldehyde with 5,5 dimethyl 1,3 cyclohexandione without catalyst. Synth Commun. 2002, 32: 3063-3067. 10.1081/SCC-120012999.View ArticleGoogle Scholar
- Bigdeli M: Clean synthesis of 1,8-dioxooctahydroxanthenes promoted by DABCO-bromine in aqueous media. Chinese Chemical Letters. 2010, 21: 1180-1182. 10.1016/j.cclet.2010.05.018.View ArticleGoogle Scholar
- Pore DM, Shaikh TS, Patil NG, Dongare SB, Desai UV: Envirocat EPZ 10: A solid acid catalyst for the synthesis of 1,8-dioxooctahydroxanthenes in aqueous medium. Synthetic Commun. 2010, 40: 2215-2219. 10.1080/00397910903221027.View ArticleGoogle Scholar
- Shahkarami Z, Maleki N, Rostamizadeh M: An efficient synthesis of 2, 20-arylmethylene bis(3-hydroxy-5,5-dimethyl-2-cyclohexene-1-one) and 1,8-dioxooctahydroxanthenes using ZnO and ZnO acetyl chloride. Chinese Chemical Letters. 2010, 21: 686-689. 10.1016/j.cclet.2010.02.005.View ArticleGoogle Scholar