Skip to main content
Download PDF
Download ePub

Efficient synthesis and antimicrobial evaluation of some Mannich bases from 2-arylidine-1-thia-4-azaspiro[4.5]decan-3-ones

Chemistry Central Journal volume 9, Article number: 25 (2015) Cite this article

Abstract

Background

Thiazolidinone, has been employed in the preparation of different important drugs required for treatment of inflammations, bacterial infections, and hypertension. Mannich bases have been shown to exhibit diverse biological activities, such as antibacterial, and antifungal activities. Spiroheterocycles including thiazolidine moiety have antimicrobial activity.

Results

In this study, a novel, rapid, and efficient protocol is developed for the synthesis of various 2-arylidine-1-thia-4-azaspiro[4.5]decan-3-ones using sodium dodecylbenzene sulfonate (DBSNa) as an inexpensive and readily available reagent in acetic acid at room temperature. High yields, easy work-up, and short reaction times are advantages of this procedure. The synthesized arylidines were undergone Mannich reaction with formaldehyde and secondary amines in absolute ethanol at room temperature to afford the corresponding N-Mannich bases. All prepared Mannich bases were evaluated for their antimicrobial activity.

Conclusions

Good activity was noted for Mannich bases from 2-arylidine-1-thia-4-azaspiro[4.5]decan-3-ones, with some members recorded higher antimicrobial activity.

Synthesis of Mannich bases of 2-arylidine-1-thia-4-azaspiro[4.5]decan-3-ones.

Background

There are many bioactive molecules which possess various heteroatoms such as nitrogen, sulfur and oxygen, always taken the attention of chemists over the years mainly because of their biological significance. Thiazolidinones are thiazolidine derivatives which have a sulfur atom at position 1, a nitrogen atom at position 3 and a carbonyl group at position 2, 4, or 5 [1], is considered as an important biologically active scaffold that possesses almost all types of biological activities [2]. This heterocyclic system has been employed in the preparation of different important drugs required for treatment of inflammations [3], bacterial infections [4], and hypertension [5]. Some of the thiazole analogues are used as fungicides, inhibiting in vivo the growth of xanthomonas and as ingredients of herbicides, antischistosomicidal, and anthelmintic drugs [6]. Mannich bases are reported to show a diversity of biological activities, such as antibacterial [7,8], antifungal [9,10] activities. Spiro derivatives have antibacterial, anticancer, and anticonvulsants activities. Spiro heterocycles were used as nitric oxide synthesis inhibitors [11] and potential topical agents for vaginal infection [12]. Spiro heterocyclic compounds including thiazolidine moiety have antimicrobial activity [13].

In this paper and as a consequence of our previous work on the synthesis of N-heterocyclic compounds [14–18], and bioactive heterocyclic agents [19–21], we reported herein an efficient protocol to the synthesis of N-Mannich bases (6a-r) from 2-arylidine-1-thia-4-azaspiro[4.5]decan-3-ones (5a-f). The anti-microbial activity of the prepared compounds (6a-r) was screened.

Results and discussion

Chemistry

First of all, 1-thia-4-azaspiro[4.5]decan-3-one (3) was prepared via the three component cyclocondensation reaction of cyclohexanone, thioglycolic acid, and ammonium carbonate according to the previously reported procedure [22] as shown in Scheme 1.

Scheme 1
scheme 1

Synthesis of 1-thia-4-azaspiro[4.5]decan-3-one (3).

Full size image

Synthesis of 2-arylidine-1-thia-4-azaspiro[4.5]decan-3-ones (5a-f)

In the first part of our research, we investigated a novel, rapid and efficient protocol that was developed for the synthesis of some 2-arylidine-1-thia-4-azaspiro[4.5]decan-3-ones (5a–f) by the condensation of 1-thia-4-azaspiro[4.5]decan-3-one (3) with aromatic aldehydes (4a–f) using sodium dodecylbenzene sulfonate (DBSNa) (20 mol %) in acetic acid at room temperature as shown in Scheme 2 and Table 1.

Scheme 2
scheme 2

Synthesis of 2-arylidine-1-thia-4-azaspiro[4.5]decan-3-ones (5a-f).

Full size image
Table 1 Synthesis of the 2-arylidine-1-thia-4-azaspiro[4.5]decan-3-ones (5a–f) using DBSNa (15 mol%)
Full size table

To find out the suitable conditions for the synthesis of 2-arylidine-1-thia-4-azaspiro[4.5]decan-3-ones, a series of experiments were performed with the standard reaction of 1-thia-4-azaspiro[4.5]decan-3-one (3) and benzaldehyde (4a) as a model reaction (Scheme 3, Table 2).

Scheme 3
scheme 3

Synthesis of 2-benzylidine-1-thia-4-azaspiro[4.5]decan-3-ones (5a).

Full size image
Table 2 The effect of reaction condition on the synthesis of (5a) under various conditionsa
Full size table

Effect of the reaction conditions

In our initial study, we tried to optimize the model procedure mentioned above by detecting the efficiency of different reaction conditions, such as piperidine/EtOH, p-TSA/EtOH, AcOH/EtOH, AcONa/AcOH, H2SO4/AcOH, DBSNa/MeOH, DBSNa/EtOH, DBSNa/H2O, DBSNa/AcOH (Table 2).

In each case, the reactants (10 mmol) were allowed together in 10 mL solvent at room temperature. In the case of piperidine/EtOH, p-TSA/EtOH, AcOH/EtOH, and AcONa/AcOH, the reaction proceeded with comparatively longer reaction time and poor reaction yield (Table 2, entries 1–4). Acetic acid acidified with a drop of H2SO4 can push the reaction towards the formation of product in yields of 61% (Table 2, entry 5).

In the presence of sodium dodecylbenzene sulfonate (DBSNa), the reaction was possible and the product (5a) was obtained in good yields.

Sodium dodecylbenzene sulfonate was used in different reaction media such as ethanol, methanol, water, and acetic acid (Table 2, entries 6–9). The best results were obtained when DBSNa was used as catalyst in acetic acid as reaction medium, which provided a yield of 94% (Table 2, entry 8).

Unfortunately, when the reaction was performed in water, the yield of the desired product was obtained in a trace amount (Table 2, entry 9).

Evaluation of catalytic activity of DBSNa

To determine the appropriate concentration of the catalyst used, we investigated the model reaction at different concentrations of DBSNa (5, 10, 15, 20, and 25 mol %). It was found that when the amount of DBSNa was increased from 5 to 20 mol%, the yield increased from 68 to 94%, respectively. However, there was no significant change in reaction yield when the amount of catalyst was increased further, to 25 mol%. Thus, 20 mol% DBSNa in acetic acid is sufficient to push this reaction forward (Table 3).

Table 3 Evaluation of catalytic activity of DBSNa in the synthesis of (5a)a
Full size table

Synthesis of Mannich bases of 2-arylidine-1-thia-4-azaspiro[4.5]decan-3-ones (6a-r)

The second part of the research includes the preparation of a series of Mannich bases (6a-r) in good yield (71-91%) by the reaction of 2-arylidine-1-thia-4-azaspiro[4.5]decan-3-ones (5a–f) with formaldehyde and secondary amines (piperidine, morpholine, and pyrrolidine) in absolute ethanol at room temperature for 1.5-4 h (Scheme 4 and Table 4).

Scheme 4
scheme 4

Synthesis of Mannich bases (6a-r).

Full size image
Table 4 Synthesis of the Mannich bases (6a-r)a
Full size table

The structures of the isolated new products (6a-r) were deduced by analyzing their physical and spectroscopic data, such as the data obtained using IR, 1H NMR, and 13C NMR spectroscopy.

Taking (6b) as an example, the IR spectrum showed the lack of the absorption band corresponding to NH group. The 1H NMR spectrum showed the presence of a singlet signal at δ = 4.15 ppm for the methylene protons and two triplet signals at 2.47, 3.59, ppm for morpholine ring protons.

Antimicrobial activity

In vitro antibacterial activity

The synthesized compounds (6a-r) were screened in vitro for their antibacterial at 50 mg/mL concentration against Staphylococcus aureus as Gram positive bacteria, Escherichia Coli, Pseudomonas aeroginosa as Gram negative bacteria using Ciprofloxacin as standard antibacterial reference. Most of the tested compounds showed excellent antibacterial activities with respect to the reference drug.

The results obtained in Table 5 indicated that the type of substituents (Ar) and (R) are the controlling factors in developing the total antibacterial properties of the tested Mannich bases (6a-r).

Table 5 Bactericidal activity of Mannich bases (6a-r) using Ciprofloxacin as standard antibacterial referencea
Full size table

Data in Table 5 revealed that compounds 6e, 6 h, 6 k, 6 m, 6n, 6p and 6q, have superior significant antibacterial potency. Compounds 6n and 6q [Ar = 4-MeOC6H4 and 4-pyridyl; R = morpholin-1-yl] have excellent activities against Gram positive bacteria (Staphylococcus aureus) and Gram-negative bacteria (Escherichia Coli and Pseudomonas aeroginosa). Compound 6p [Ar = 4-pyridyl; R = piperidin-1-yl] has excellent potency against Staphylococcus aureus, moderate activity against Pseudomonas aeroginosa, and poor activity against Escherichia Coli. Structure-Activity relationships (SAR) based on the obtained results indicated that the best observed antibacterial activity is that which Ar is phenyl ring attached with electron donating function (MeO) as exhibit in compound 6n. However, substituting the phenyl ring with electron withdrawing function (Cl, NO2) the antibacterial behavior is decreased. When Ar is unsubstituted phenyl ring the antibacterial activity is not significant. It has also, been noticed that when Ar is pyridine ring exhibited in (6p) and (6q) increase in the observed antibacterial properties was noticed compared with the case of using phenyl ring.

In vitro antifungal activity

With respect to antifungal activity, the synthesized compounds were screened against three fungal strains; Aspergillus niger, Candida albicans, Fusarium oxysporium using Nystatin as standard antifungal reference (at 50 mg/mL concentration). Most of the tested compounds showed excellent antibacterial activities with respect to the reference drug.

As antibacterial activity, the obtained results indicated that the type of substituents (Ar) and (R) are the controlling factors in developing the antifungal properties of the tested compounds (6a-r). Results of antifungal activities were shown in Table 6. Data in Table 6 showed that compounds 6d, 6 l, and 6p have remarkable antifungal potency. Compounds 6 l [Ar = 4-O2NC6H4; R = piperidin-1-yl] exhibit excellent activities against Candida albicans and Fusarium oxysporium as well as good potency against Aspergillus niger. Compound 6p [Ar = 4-pyridyl; R = piperidin-1-yl] has excellent activity against Aspergillus niger as well as good potency against Candida albicans and Fusarium oxysporium. Compound 6d [Ar = 4-ClC6H4; R = piperidin-1-yl] exhibit good potency against Aspergillus niger, Candida albicans and Fusarium oxysporium. Structure-Activity relationships (SAR) based on the obtained results indicated that the best observed antifungal activity is that which Ar is phenyl ring attached with electron withdrawing function (NO2, Cl) as exhibit in compound 6l and 6d, respectively. However, substituting the phenyl ring with electron donating function (MeO) the antifungal behavior is decreased. When Ar is unsubstituted phenyl ring the antifungal activity is not remarkable. It has also, been noticed that when Ar is pyridine ring exhibited in (6p) increase in the observed potent antifungal properties was noticed compared with the case of using phenyl ring.

Table 6 Fungicidal activity of Mannich bases (6a-r) using Nystatin as standard antifungal referencea
Full size table

Conclusions

The authors have developed a novel, rapid and efficient protocol for the synthesis of various 2-arylidine-1-thia-4-azaspiro[4.5]decan-3-ones using sodium dodecylbenzene sulfonate (DBSNa) in acetic acid at room temperature. The results clearly demonstrate that the using of the sodium dodecylbenzene sulfonate as an inexpensive and readily available reagent markedly enhances the efficiency of the chemical processes of interest. Mannich bases from the synthesized 2-arylidine-1-thia-4-azaspiro[4.5]decan-3-ones were achieved and evaluated as antimicrobial agents and showed remarkable activities.

Experimental

Chemistry

General methods

The time required for completion of each reaction was monitored by TLC. All melting points are uncorrected and were measured on a Gallenkamp apparatus. The IR spectra were recorded on a Shimadzu 470 IR spectrometer (KBr) νmax, cm−1. The 1H and 13C NMR spectra were measured on a Varian EM-200 (1H: 400 MHz, 13C: 100 MHz) spectrometer with TMS as internal standard. Mass spectra were determined on a JEOL JMS-600 spectrometer. Elemental analyses (C, H, N, and S) were performed on an elemental analysis system GmbH VarioEL V2.3.

General procedure for synthesis of 2-Arylidine-1-thia-4-azaspiro[4.5]decan-3-ones (5a-f)

To a solution of (3) (1.71 g, 10 mmol) in acetic acid (10 mL), corresponding aromatic aldehyde (10 mmol) was added. Then DBSNa (20 mol%) was added and the reaction mixture was stirred at room temperature for the desired time as monitored by TLC (Table 1). After completion of the reaction, the solid product was filtered and washed with cold water, dried, and recrystallized from ethanol (95%).

2-Benzylidene-1-thia-4-azaspiro[4.5]decan-3-one (5a)

Pale yellow crystals; mp 200–202°C; IR: 3200 (NH), 3020 (CH arom.), 1700 (C = O), 695 (C-S); 1H NMR (DMSO-d6): 1.10–1.95 (m, 10H, 5 × CH2), 7.50 (m, 5H, Ph-H), 7.85 (s, 1H, CH), 8.97 (s, 1H, NH, D2O-exchangeable) ppm; 13C NMR: 21.7 (2 CH2), 24.8 (CH2), 25.6 (2CH2), 47.9 (spiro C), 122.3 (CH), 124.8 (2CH), 126.1 (2CH), 129.4 (C), 131.1 (C), 136.7 (C), 170.2 (C = O) ppm; EI-MS, m/z (%): 260.10 (8) [M + 1], 259.01 (54) [M+], 216.05 (100.0). Calc. for C15H17NOS: C, 69.46; H, 6.61; N, 5.40; S, 12.36. Found: C, 69.28; H, 6.47; N, 5.24; S, 12.16.

2-(4-Chlorobenzylidene)-1-thia-4-azaspiro[4.5]decan-3-one (5b)

Pale yellow crystals; mp 210–212°C; IR: 3190 (NH), 3085 (CH arom.), 1695 (C = O), 695 (C-S); 1H NMR (DMSO-d6): 1.15–2.10 (m, 10H, 5 × CH2), 7.35 (d, 2H, 2CH, J = 7.4), 8.00 (d, 2H, 2CH, J = 7.4), 8.90 (s, 2H, CH + NH) ppm; EI-MS, m/z (%): 293.54 (44) [M+], 258.15 (30), 250.02 (100.0). Calc. for C15H16ClNOS: C, 61.32; H, 5.49; Cl, 12.07; N, 4.77; S, 10.91. Found: C, 61.12; H, 5.30; Cl, 11.88; N, 4.59; S, 10.78.

2-(4-Bromobenzylidene)-1-thia-4-azaspiro[4.5]decan-3-one (5c))

Pale yellow crystals; mp 221–222°C; IR: 3200 (NH), 3090 (CH arom.), 1695 (C = O), 695 (C-S); 1H NMR (DMSO-d6): 1.00–2.10 (m, 10H, 5 × CH2), 7.40 (d, 2H, 2CH, J = 7.2), 8.10 (d, 2H, 2CH, J = 7.2), 8.60 (s, 1H, CH), 10.10 (s, 1H, NH) ppm; EI-MS, m/z (%): 339.01 (20) [M+], 296.15 (100.0), 79 (15). Calc. for C15H16BrNOS: C, 53.26; H, 4.77; Br, 23.62; N, 4.14; S, 9.48. Found: C, 53.00; H, 4.80; Br, 23.47; N, 3.81; S, 9.19.

2-(4-Nitrobenzylidene)-1-thia-4-azaspiro[4.5]decan-3-one (5d))

Yellow crystals; mp 249–250°C; IR: 3220 (NH), 3090 (CH arom.), 1690 (C = O), 690 (C-S); 1H NMR (DMSO-d6): 1.20–2.10 (m, 10H, 5 × CH2), 8.10 (d, 2H, 2CH, J = 7.4), 8.50 (d, 2H, 2CH, J = 7.4), 8.70 (s, 1H, CH), 10.20 (s, 1H, NH) ppm; EI-MS, m/z (%): 304.61 (29) [M+], 261.25 (100.0). Calc. for C15H16N2O3S: C, 59.19; H, 5.30; N, 9.20; S, 10.54. Found: C, 58.89; H, 5.43; N, 9.00; S, 10.30.

2-(4-Methylbenzylidene)-1-thia-4-azaspiro[4.5]decan-3-one (5e))

Yellow crystals; mp 230–231°C; IR: 3200 (NH), 3090 (CH arom.), 1695 (C = O), 690 (C-S); 1H NMR (DMSO-d6): 1.10–2.05 (m, 10H, 5 × CH2), 3.85 (s, 3H, CH3), 7.05 (d, 2H, 2CH, J = 7.3), 7.60 (d, 2H, 2CH, J = 7.3), 7.85 (s, 1H, CH), 8.90 (s, 1H, NH) ppm; 13C NMR: 22.2 (2 CH2), 24.7 (CH2), 26.1 (2CH2), 42.1 (CH3), 47.3 (spiro C),121.9 (CH), 125.3 (2CH), 126.7 (2CH), 129.2 (C), 131.5 (C), 136.9 (C), 171.3 (C = O) ppm; EI-MS, m/z (%): 290.54 (12) [M + + 1], 289.02 (40) [M +], 274.01 (17), 246.12 (100.0). Calc. for C16H19NO2S: C, 66.41; H, 6.62; N, 4.84; S, 11.08. Found: C, 66.09; H, 6.45; N, 4.68; S, 10.85.

2-(Pyridin-4-ylmethylene)-1-thia-4-azaspiro[4.5]decan-3-one (5f))

Pale yellow crystals; mp 225–227°C; IR: 3190 (NH), 3090 (CH arom.), 1695 (C = O), 695 (C-S); 1H NMR (DMSO-d6): 1.05–2.10 (m, 10H, 5CH2), 7.00 (d, 2H, 2CH, J = 6.8), 7.70 (d, 2H, 2CH, J = 6.8), 7.80 (s, 1H, CH), 8.10 (s, 1H, NH) ppm; EI-MS, m/z (%):260.15 (25) [M+], 217.15 (100.0). Calc. for C14H16N2OS: C, 64.58; H, 6.19; N, 10.76; S, 12.32. Found: C, 64.36; H, 6.00; N, 10.79; S, 12.20.

General procedure for synthesis of Mannich Bases (6a-r))

To a solution of 2-benzylidene-1-thia-4-azaspiro[4.5]decan-3-one (5a) (0.259 g, 1 mmol) in 5 mL of absolute ethanol was added a mixture of sec. amine (1.5 mmol) and aqueous formaldehyde 35% (0.2 mL, 1.5 mmol) also dissolved in 5 mL absolute ethanol. The reaction mixture was stirred for the desired time as monitored by TLC (Table 4), refrigerated for 24 h to form crystals. The crystalline product was separated by filtration, vacuum dried and recrystallized from ethanol.

2-Benzylidene-4-(piperidin-1-ylmethyl)-1-thia-4-azaspiro[4.5]decan-3-one (6a))

Pale yellow crystals; mp 119–120°C; IR: 3030 (CH arom.), 2950 (CH aliph.), 1700 (C = O), 695 (C-S); 1H NMR (CDCl3): 1.38–1.51 (m, 12H, 6CH2), 2.10-2.37 (m, 4H, 2CH2), 2.43-2.48 (m, 4H, 2CH2), 4.08 (s, 2H, CH2), 7.32-7.60 (m, 5H, Ph-H), 7.75 (s, 1H, CH) ppm; EI-MS, m/z (%): 357.05 (9) [M+ + 1], 356.01 (46) [M +], 258.12 (25), 215.65 (100.0). Calc. for C21H28N2OS: C, 70.75; H, 7.92; N, 7.86; S, 8.99. Found: C, 70.52; H, 7.80; N, 7.66; S, 8.78.

2-Benzylidene-4-(morpholinomethyl)-1-thia-4-azaspiro[4.5]decan-3-one (6b))

Pale yellow crystals; mp 135–137°C; IR: 3020 (CH arom.), 2955 (CH aliph.), 1700 (C = O), 695 (C-S); 1H NMR (DMSO-d6): 1.42–1.51 (m, 6H, 3CH2), 2.15-2.40 (m, 4H, 2CH2), 2.47 (t, 4H, 2CH2, J = 6.9), 3.59 (t, 4H, 2CH2, J = 6.9), 4.15 (s, 2H, CH2), 7.33-7.61 (m, 5H, Ph-H), 7.71 (s, 1H, CH) ppm; EI-MS, m/z (%): 359.01 (5) [M+ + 1], 358.00 (32) [M +], 258.09 (17), 216.05 (100.0). Calc. for C20H26N2O2S: C, 67.01; H, 7.31; N, 7.81; S, 8.94. Found: C, 66.80; H, 7.05; N, 7.65; S, 8.70.

2-Benzylidene-4-(pyrrolidin-1-ylmethyl)-1-thia-4-azaspiro[4.5]decan-3-one (6c))

Yellow crystals; mp 126–127°C; IR: 3020 (CH arom.), 2880 (CH aliph.), 1705 (C = O), 695 (C-S); 1H NMR (CDCl3): 1.43-1.52 (m, 6H, 3CH2), 1.62 (t, 4H, 2CH2, J = 7.1), 2.17-2.40 (m, 4H, 2CH2), 2.53 (t, 4H, 2CH2, J = 7.1), 4.01 (s, 2H, CH2), 7.30-7.58 (m, 5H, Ph-H), 7.60 (s, 1H, CH) ppm; EI-MS, m/z (%): 341.82 (15) [M +], 258.09 (25), 215.85 (100.0). Calc. for C20H26N2OS: C, 70.14; H, 7.65; N, 8.18; S, 9.36. Found: C, 69.80; H, 7.43; N, 7.76; S, 9.08.

2-(4-Chlorobenzylidene)-4-(piperidin-1-ylmethyl)-1-thia-4-azaspiro[4.5]decan-3-one (6d))

Yellow crystals; mp 120–122°C; IR: 3050 (CH arom.), 2955 (CH aliph.), 1700 (C = O), 695 (C-S); 1H NMR (CDCl3): 1.44–1.61 (m, 12H, 6CH2), 2.10-2.46 (m, 8H, 4CH2), 4.25 (s, 2H, CH2), 7.40 (d, 2H, 2CH, J = 7.6), 7.60 (s, 1H, CH), 7.72 (d, 2H, 2CH, J = 7.6) ppm; EI-MS, m/z (%): 390.65 (32) [M +], 292.12 (16), 215.05 (100.0). Calc. for C21H27ClN2OS: C, 64.51; H, 6.96; Cl, 9.07; N, 7.17; S, 8.20. Found: C, 64.22; H, 6.66; Cl, 8.81; N, 7.00; S, 7.92.

2-(4-Chlorobenzylidene)-4-(morpholinomethyl)-1-thia-4-azaspiro[4.5]decan-3-one (6e))

Pale yellow crystals; mp 141–143°C; IR: 3050 (CH arom.), 2880 (CH aliph.), 1700 (C = O), 695 (C-S); 1H NMR (DMSO-d6): 1.44–1.56 (m, 6H, 3CH2), 2.18-2.45 (m, 4H, 2CH2), 2.52 (t, 4H, 2CH2, J = 7.8), 3.50 (t, 4H, 2CH2, J = 7.9), 4.23 (s, 2H, CH2), 7.38 (d, 2H, 2CH, J = 6.5), 7.64 (s, 1H, CH), 7.70 (d, 2H, 2CH, J = 6.5) ppm; EI-MS, m/z (%): 392.71 (56) [M +], 292.00 (20), 216.65 (100.0). Calc. for C20H25ClN2O2S: C, 61.13; H, 6.41; Cl, 9.02; N, 7.13; S, 8.16. Found: C, 60.86; H, 6.20; Cl, 8.80; N, 6.90; S, 7.88.

2-(4-Chlorobenzylidene)-4-(pyrrolidin-1-ylmethyl)-1-thia-4-azaspiro[4.5]decan-3-one (6f))

Pale yellow crystals; mp 133–135°C; IR: 3035 (CH arom.), 2895 (CH aliph.), 1700 (C = O), 690 (C-S); 1H NMR (CDCl3): 1.40-1.51 (m, 6H, 3CH2), 1.64 (t, 4H, 2CH2, J = 7.5), 2.25-2.38 (m, 4H, 2CH2), 2.62 (t, 4H, 2CH2, J = 7.5), 4.12 (s, 2H, CH2), 7.35 (d, 2H, 2CH, J = 6.3), 7.62 (d, 2H, 2CH, J = 6.3), 7.64 (s, 1H, CH) ppm; EI-MS, m/z (%): 375.90 (18) [M +], 291.89 (30), 215.70 (100.0). Calc. for C20H25ClN2OS: C, 63.73; H, 6.68; Cl, 9.41; N, 7.43; S, 8.51. Found: C, 63.45; H, 6.70; Cl, 9.19; N, 7.20; S, 8.27.

2-(4-Bromobenzylidene)-4-(piperidin-1-ylmethyl)-1-thia-4-azaspiro[4.5]decan-3-one (6g))

Pale yellow crystals; mp 133–135°C; IR: 3050 (CH arom.), 2940 (CH aliph.), 1705 (C = O), 690 (C-S); 1H NMR (CDCl3): 1.38–1.50 (m, 12H, 6CH2), 2.05-2.47 (m, 8H, 4CH2), 4.05 (s, 2H, CH2), 7.31 (d, 2H, 2CH, J = 7.1), 7.58 (s, 1H, CH), 7.62 (d, 2H, 2CH, J = 7.1) ppm; EI-MS, m/z (%): 436.15 (19) [M + 2], 434.09 (21) [M +], 335.60 (11), 216.95 (100.0). Calc. for C21H27BrN2OS: C, 57.93; H, 6.25; Br, 18.35; N, 6.43; S, 7.36. Found: C, 57.68; H, 6.00; Br, 18.05; N, 6.22; S, 7.10.

2-(4-Bromobenzylidene)-4-(morpholinomethyl)-1-thia-4-azaspiro[4.5]decan-3-one (6h))

Pale yellow crystals; mp 152–153°C; IR: 3030 (CH arom.), 2850 (CH aliph.), 1705 (C = O), 695 (C-S); 1H NMR (DMSO-d6): 1.40–1.53 (m, 6H, 3CH2), 2.10-2.40 (m, 4H, 2CH2), 2.52 (t, 4H, 2CH2, J = 6.9), 3.42 (t, 4H, 2CH2, J = 6.9), 4.09 (s, 2H, CH2), 7.35 (d, 2H, 2CH, J = 6.5), 7.65 (s, 1H, CH), 7.58 (d, 2H, 2CH, J = 6.5) ppm; EI-MS, m/z (%): 438.01 (9) [M + + 2], 436.2 (10) [M+], 336.20 (43), 216.75 (100.0). Calc. for C20H25BrN2O2S: C, 54.92; H, 5.76; Br, 18.27; N, 6.40; S, 7.33 Found: C, 54.75; H, 5.80; Br, 18.05; N, 6.17; S, 7.09.

2-(4-Bromobenzylidene)-4-(pyrrolidin-1-ylmethyl)-1-thia-4-azaspiro[4.5]decan-3-one (6i))

Pale yellow crystals; mp 142–143°C; IR: 3040 (CH arom.), 2890 (CH aliph.), 1700 (C = O), 695 (C-S); 1H NMR (CDCl3): 1.41-1.50 (m, 6H, 3CH2), 1.60 (t, 4H, 2CH2, J = 7.1), 2.20-2.35 (m, 4H, 2CH2), 2.59 (t, 4H, 2CH2, J = 7.1), 4.10 (s, 2H, CH2), 7.33 (d, 2H, 2CH, J = 6.5), 7.47 (s, 1H, CH), 7.55 (d, 2H, 2CH, J = 6.5) ppm; EI-MS, m/z (%): 420.96 (26) [M +], 335.89 (45), 216.71 (100.0). Calc. for C20H25BrN2OS: C, 57.00; H, 5.98; Br, 18.96; N, 6.65; S, 7.61. Found: C, 56.15; H, 5.69; Br, 18.80; N, 6.50; S, 7.57.

2-(4-Nitrobenzylidene)-4-(piperidin-1-ylmethyl)-1-thia-4-azaspiro[4.5]decan-3-one (6j))

Yellow crystals; mp 142–144°C; IR: 3050 (CH arom.), 2900 (CH aliph.), 1700 (C = O), 690 (C-S); 1H NMR (CDCl3): 1.45–1.61 (m, 12H, 6CH2), 2.17-2.49 (m, 8H, 4CH2), 4.26 (s, 2H, CH2), 7.92 (s, 1H, CH), 8.14 (d, 2H, 2CH, J = 6.8), 8.35 (d, 2H, 2CH, J = 6.8) ppm; EI-MS, m/z (%): 402.16 (15) [M + + 1], 303.62 (22), 215.85 (100.0). Calc. for C21H27N3O3S: C, 62.82; H, 6.78; N, 10.47; S, 7.99. Found: C, 62.60; H, 6.57; N, 10.49; S, 7.76.

4-(Morpholinomethyl)-2-(4-nitrobenzylidene)-1-thia-4-azaspiro[4.5]decan-3-one (6k))

Yellow crystals; mp 158–160°C; IR: 3020 (CH arom.), 2900 (CH aliph.), 1700 (C = O), 695 (C-S); 1H NMR (DMSO-d6): 1.45–1.58 (m, 6H, 3CH2), 2.20-2.52 (m, 4H, 2CH2), 2.55 (t, 4H, 2CH2, J = 7.5), 3.54 (t, 4H, 2CH2, J = 7.5), 4.20 (s, 2H, CH2), 7.71 (s, 1H, CH), 8.08 (d, 2H, 2CH, J = 6.8), 8.29 (d, 2H, 2CH, J = 6.8) ppm; EI-MS, m/z (%): 403.12 (41) [M +], 303.25 (35), 215.36 (100.0). Calc. for C20H25N3O4S: C, 59.53; H, 6.25; N, 10.41; S, 7.95. Found: C, 59.58; H, 6.01; N, 10.26; S, 7.71.

2-(4-Nitrobenzylidene)-4-(pyrrolidin-1-ylmethyl)-1-thia-4-azaspiro[4.5]decan-3-one (6l))

Yellow crystals; mp 149–151°C; IR: 3025 (CH arom.), 2990 (CH aliph.), 1705 (C = O), 690 (C-S); 1H NMR (CDCl3): 1.43-1.52 (m, 6H, 3CH2), 1.61 (t, 4H, 2CH2, J = 6.9), 2.25-2.37 (m, 4H, 2CH2), 2.58 (t, 4H, 2CH2, J = 6.9), 4.20 (s, 2H, CH2), 7.41 (s, 1H, CH), 7.93 (d, 2H, 2CH, J = 6.8), 8.21 (d, 2H, 2CH, J = 6.8) ppm; EI-MS, m/z (%): 387.20 (19) [M +], 303.10 (44), 215.87 (100.0). Calc. for C20H25N3O3S: C, 61.99; H, 6.50; N, 10.84; S, 8.27. Found: C, 62.05; H, 6.24; N, 10.70; S, 8.00.

2-(4-Methoxybenzylidene)-4-(piperidin-1-ylmethyl)-1-thia-4-azaspiro[4.5]decan-3-one (6m))

Pale yellow crystals; mp 121–123°C; IR: 3200 (NH), 3090 (CH arom.), 1700 (C = O), 690 (C-S); 1H NMR (CDCl3): 1.42–1.53 (m, 12H, 6CH2), 2.15-2.41 (m, 8H, 4CH2), 3.50 (s, 3H, CH3), 4.10 (s, 2H, CH2), 6.92 (d, 2H, 2CH, J = 6.8), 7.45 (d, 2H, 2CH, J = 6.8), 7.56 (s, 1H, CH) ppm; EI-MS, m/z (%): 386.20 (15) [M+], 288 (45), 216.05 (100.0). Calc. for C22H30N2O2S: C, 68.36; H, 7.82; N, 7.25; S, 8.30. Found: C, 68.39; H, 7.70; N, 7.00; S, 8.02.

2-(4-Methoxybenzylidene)-4-(morpholinomethyl)-1-thia-4-azaspiro[4.5]decan-3-one (6n))

Pale yellow crystals; mp 133–135°C; IR: 3050 (CH arom.), 2950 (CH aliph.), 1700 (C = O), 695 (C-S); 1H NMR (CDCl3): 1.41–1.52 (m, 6H, 3CH2), 2.15-2.46 (m, 4H, 2CH2), 2.51 (t, 4H, 2CH2, J = 7.1), 3.50 (t, 4H, 2CH2, J = 7.1), 4.08 (s, 2H, CH2), 7.01 (d, 2H, 2CH, J = 6.9), 7.60 (d, 2H, 2CH, J = 6.9), 7.69 (s, 1H, CH) ppm; EI-MS, m/z (%): 388.19 (20) [M +], 288.75 (51), 215.06 (100.0). Calc. for C21H28N2O3S: C, 64.92; H, 7.26; N, 7.21; S, 8.25. Found: C, 64.70; H, 7.00; N, 7.30; S, 8.01.

2-(4-Methoxybenzylidene)-4-(pyrrolidin-1-ylmethyl)-1-thia-4-azaspiro[4.5]decan-3-one (6o))

Yellow crystals; mp 140–142°C; IR: 3050 (CH arom.), 2900 (CH aliph.), 1700 (C = O), 695 (C-S); 1H NMR (CDCl3): 1.40-1.49 (m, 6H, 3CH2), 1.60 (t, 4H, 2CH2), 2.20-2.32 (m, 4H, 2CH2), 2.55 (t, 4H, 2CH2, J = 7.3), 4.15 (s, 2H, CH2, J = 7.3), 7.01 (d, 2H, 2CH, J = 6.8), 7.26 (d, 2H, 2CH, J = 6.8), 7.29 (s, 1H, CH) ppm; EI-MS, m/z (%): 372.19 (32) [M +], 289.02 (35), 215.97 (100.0). Calc. for C21H28N2O2S: C, 67.71; H, 7.58; N, 7.52; S, 8.61. Found: C, 67.58; H, 7.60; N, 7.40; S, 8.45.

4-(Piperidin-1-ylmethyl)-2-(pyridin-4-ylmethylene)-1-thia-4-azaspiro[4.5]decan-3-one (6p))

Pale yellow crystals; mp 111–113°C; IR: 3050 (CH arom.), 1695 (C = O), 690 (C-S); 1H NMR (CDCl3): 1.40–1.56 (m, 12H, 6CH2), 2.01-2.55 (m, 8H, 4CH2), 4.00 (s, 2H, CH2), 7.05 (d, 2H, 2CH, J = 6.9), 7.30 (s, 1H, CH), 7.83 (d, 2H, 2CH, J = 6.9), ppm; EI-MS, m/z (%): 357.15 (16) [M+], 259.30 (40), 217.15 (100.0). Calc. for C20H27N3OS: C, 67.19; H, 7.61; N, 11.75; S, 8.97. Found: C, 67.25; H, 7.50; N, 11.80; S, 8.66.

4-(Morpholinomethyl)-2-(pyridin-4-ylmethylene)-1-thia-4-azaspiro[4.5]decan-3-one (6q))

Pale yellow crystals; mp 125–127°C; IR: 3050 (CH arom.), 1700 (C = O), 695 (C-S); 1H NMR (CDCl3): 1.39–1.50 (m, 6H, 3CH2), 2.15-2.45 (m, 4H, 2CH2), 2.52 (t, 4H, 2CH2, J = 7.1), 3.47 (t, 4H, 2CH2, J = 7.1), 4.10 (s, 2H, CH2), 6.91 (d, 2H, 2CH, J = 6.9), 7.15 (s, 1H, CH), 7.80 (d, 2H, 2CH, J = 6.9) ppm; EI-MS, m/z (%): 359.60 (21) [M+], 259.95 (61), 216.95 (100.0). Calc. for C19H25N3O2S: C, 63.48; H, 7.01; N, 11.69; S, 8.92. Found: C, 63.20; H, 6.85; N, 11.71; S, 8.70.

2-(Pyridin-4-ylmethylene)-4-(pyrrolidin-1-ylmethyl)-1-thia-4-azaspiro[4.5]decan-3-one (6r))

Pale yellow crystals; mp 119–120°C; IR: 3050 (CH arom.), 1695 (C = O), 690 (C-S); 1H NMR (CDCl3): 1.40-1.49 (m, 6H, 3CH2), 1.59 (t, 4H, 2CH2, J = 7.2), 2.22-2.40 (m, 4H, 2CH2), 2.55 (t, 4H, 2CH2, J = 7.2), 4.08 (s, 2H, CH2), 6.98 (d, 2H, 2CH, J = 6.4), 7.20 (s, 1H, CH), 7.90 (d, 2H, 2CH, J = 6.4) ppm; EI-MS, m/z (%): 343.05 (20) [M+], 259.02 (65), 216.65 (100.0). Calc. for C19H25N3OS: C, 66.44; H, 7.34; N, 12.23; S, 9.34. Found: C, 66.50; H, 7.36; N, 12.00; S, 9.16.

Antimicrobial screening

Antibacterial activity

The newly synthesized compounds were screened for their antibacterial activity against bacterial isolate namely Staphylococcus aureus (ATCC 29213) as Gram positive bacteria, Escherichia Coli (ATCC 25922), Pseudomonas aeroginosa (ATCC 27953) as Gram negative bacteria by cup-plate method [23]. The sterilized nutrient agar medium was distributed 100 ml each in two 250 ml conical flasks and allowed to cool to room temperature. To these media, 18–24 h grown bacterial subcultures were added and shaken thoroughly to ensure uniform distribution of organism throughout the medium. Then, this agar medium was distributed in equal portions, in sterilized Petri dishes, ensuring that each Petri dish contains about 20 ml of the medium. The medium was then allowed for solidification. Then, cups were made with the help of a sterile cork borer (6 mm diameter) punching into the set of agar media.

The solutions of required concentration (50 μg/mL) of test compounds were prepared by dissolving the compounds in DMSO were filled into the cups with 1 mL of respective solution. Then, the Petri dishes were kept for incubation in an inverted position for 24–48 h at 37°C in an incubator. When growth inhibition zones were developed surrounding each cup, their diameter in cm was measured and compared with that of the Ciprofloxacin.

Antifungal activity

The newly synthesized compounds were screened for their antifungal activity against three fungal strains; Aspergillus niger, Candida albicans, Fusarium oxysporium at the concentration levels of 50 μg/mL by cup-plate method, using Nystatin as the standard. To the sterilized potato dextrose agar medium incubated for 72 h, subculture of fungus were added and shaken thoroughly to ensure uniform distribution. Then, this was poured into previously sterilized and labeled Petri dishes and allowed to solidify. Then, with the help of a borer four cups were made in each plate. Two cups were filled with 0.1 ml of two test dilutions and the other two cups with respective concentrations of standard dilutions. Then, the plates were left as it is for 2–3 h for diffusion and then they were kept for incubation at 37°C for 24 h. Then the diameter of the zones of growth inhibition was measured and compared with that of standard.

References

  1. Jain AK, Vaidya A, Ravichandran V, Kashaw SK, Agrawal RK. Recent developments and biological activities of thiazolidinone derivatives: A review. Bioorg Med Chem. 2012;20:3378–95.

    Article  CAS  Google Scholar 

  2. Lewis JR. Miscellaneous alkaloids: Amaryllidaceae, Sceletium, muscarine, imidazole, oxazole, peptide and other miscellaneous alkaloids. Nat Prod Rep. 1999;16:389–416.

    Article  CAS  Google Scholar 

  3. Clemence F, Marter OL, Delevalle F, Benzoni J, Jouanen A, Jouquey S, et al. 4-Hydroxy-3-quinolinecarboxamides with antiarthritic and analgesic activities. J Med Chem. 1988;31:1453–62.

    Article  CAS  Google Scholar 

  4. Tsuji K, Ishikawa H. Synthesis and Anti-pseudomonal Activity of New 2-Isocephems with a Dihydroxypyridone Moiety at C-7. Biorg Med Chem Lett. 1944;4:1601–6.

    Article  Google Scholar 

  5. Patt WC, Hamilton HW, Taylor MD, Ryan MJ, Taylor DG, Connolly CJC, et al. Structure-activity relationships of a series of 2-amino-4-thiazole-containing renin inhibitors. J Med Chem. 1992;35:2562–72.

    Article  CAS  Google Scholar 

  6. Metzger JV. Comprehensive Heterocyclic Chemistry, vol. 6. New York: Pergamon Press; 1984. p. 328.

    Google Scholar 

  7. Sridhar SK, Saravanan M, Ramesh A. Synthesis and Antibacterial Screening of Hydrazones, Schiff and Mannich Bases of Isatin Derivatives. Eur J Med Chem. 2001;36:615–25.

    Article  CAS  Google Scholar 

  8. Pandeya SN, Sriram D. Synthesis and Screening for Antibacterial Activity of Schiff’s and Mannich Bases of Isatin and its Derivatives. Acta Pharm Turc. 1998;40:33–8.

    CAS  Google Scholar 

  9. Pandeya SN, Yogeeswari P, Sriram D, Nath G. Synthesis, Antibacterial and Antifungal Activities of N-Mannich Bases of 3-[N2-pyrimethaminylimino]isatin. Indian J Pharm Sci. 2002;64:209–12.

    CAS  Google Scholar 

  10. Chhajed SS, Padwal MS. Antimicrobial Evaluation of Some Novel Schiff and Mannich Bases of Isatin and its Derivatives with Quinolin. Int J ChemTech Res. 2010;2:209–13.

    CAS  Google Scholar 

  11. Hamley P, McInally T, Tinker A: PCT Int. Appl. WO 98 46, 611, (Cl. CO7D491 10), 1998, 22 Oct. 1998, SE Appl. 97/1, 396, 15 Apr. 1997; 32 PP.; Chem. Abstr. 1998, 129, 316237 f.

  12. Trani A, Dallanoce C, Panzone G, Ripamonti F, Goldstein BP, Ciabatti R. Semisynthetic derivatives of purpuromycin as potential topical agents for vaginal infections. J Med Chem. 1997;40:967–71.

    Article  CAS  Google Scholar 

  13. Jain SC, Sinha J, Bhagat S, Errington W, Olsen CE. A Facile Synthesis of Novel Spiro-[Indole-pyrazolinyl-thiazolidine]-2,4′-dione. Synth Commun. 2003;33:563–77.

    Article  CAS  Google Scholar 

  14. Hussein EM. One-pot, Three-component, Green synthesis of Some Indeno[2′,3′:5,6] pyrido[2,1-b]benzothiazoles and Indeno[2′,3′-e]thiazolo[3,2-a]pyridines. Heterocycl Lett. 2012;2:19–26.

    CAS  Google Scholar 

  15. Hussein EM. Enviro-economic, Ultrasound-assisted One-pot, Three-component Synthesis of Pyrido[2,3-d]pyrimidines in Aqueous Medium. Z Naturforsch. 2012;67b:231–7.

    Article  Google Scholar 

  16. Hussein EM, El-Khawaga AM. Simple and Clean Procedure for Three-component Syntheses of Spiro{pyrido[2,1-b]benzothiazole-3,3′-indolines} and Spiro{thiazolo[3,2-a]pyridine-7,3′-indolines} in Aqueous Medium. J Heterocycl Chem. 2012;49:1296–301.

    Article  CAS  Google Scholar 

  17. Hussein EM. Ultrasound-promoted Efficient Domino Reaction for One-pot synthesis of Spiro-5-cyanopyrimidines: A Rapid Procedure. Monatsh Chem. 2013;144:1691–7.

    Article  CAS  Google Scholar 

  18. Hussein EM. Ammonium Chloride-Catalyzed Four-Component Sonochemical Synthesis of Novel Hexahydroquinolines Bearing a Sulfonamide Moiety. Russian J Org Chem. 2015;1:54–64.

    Article  Google Scholar 

  19. Hussein EM, Abdel-Monem MI. Regioselective Synthesis and Anti-inflammatory Activity of Novel Dispiro[pyrazolidine-4,3′-pyrrolidine-2′,3″-indoline]-2″,3,5-triones. ARKIVOC. 2011;10:85–98.

    Article  Google Scholar 

  20. Hussein EM, Abdel-Monem MI. Regioselective Synthesis of Dispiro[indane-2,3′-pyrrolidine-2′,3″-indoline]-1,2″,3-triones and Evaluation of Their Anti-inflammatory Activities. Int Res J Pharm Pharmacol. 2012;2:45–51.

    Google Scholar 

  21. Abdel-Mohsen SA, Hussein EM. A Green Synthetic Approach to the Synthesis of Schiff Bases from 4-Amino-2-thioxo-1,3-diazaspiro[5.5]undec-4-ene-5-carbonitrile as Potential Anti-inflammatory. Agents Russian j Bioorg Chem. 2014;40:343–9.

    Article  CAS  Google Scholar 

  22. Crossley NS. Carl Djerassi. Kielczewski MA: Studies in Organic Sulphur Compounds. Part XVII. The Synthesis of Previously Inaccessible Acylated Enamines by Desulphurisation of Thiazolidines. J. Chem. Soc; 1965. p. 6253–64.

    Google Scholar 

  23. Vogel HG. Drug discovery and evaluation, pharmacological assay. 2nd ed. New York: Springer; 2002. p. 670.

    Book  Google Scholar 

Download references

Acknowledgments

Authors are thankful to Assiut University and the Faculty of Science (Assiut - Egypt) for providing financial assistance to carry out this work.

Author information

Authors and Affiliations

  1. Department of Chemistry, Faculty of Applied Sciences, Umm Al-Qura University, Makkah, Saudi Arabia

    Essam M Hussein, Ghada S Masaret & Khalid S Khairou

  2. Department of Chemistry, Faculty of Science, Assiut University, Assiut, 71516, Egypt

    Essam M Hussein

Authors
  1. Essam M Hussein
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Ghada S Masaret
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Khalid S Khairou
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Essam M Hussein.

Additional information

Competing interests

The authors declare that they have no competing interests.

Authors’ contributions

EMH designed the research, performed the experimental work, and shared in writing the manuscript; GSM analyzed the data and shared in writing the manuscript; KSK revised the manuscript. All authors read and approved the final manuscript.

Rights and permissions

Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (https://creativecommons.org/licenses/by/4.0), which permits use, duplication, adaptation, distribution, and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Hussein, E.M., Masaret, G.S. & Khairou, K.S. Efficient synthesis and antimicrobial evaluation of some Mannich bases from 2-arylidine-1-thia-4-azaspiro[4.5]decan-3-ones. Chemistry Central Journal 9, 25 (2015). https://doi.org/10.1186/s13065-015-0101-8

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI: https://doi.org/10.1186/s13065-015-0101-8

Keywords

BMC Chemistry

ISSN: 2661-801X

Contact us