- Research article
- Open Access
The sol-gel entrapment of noble metals in hybrid silicas: a molecular insight
© Fidalgo et al.; licensee Chemistry Central Ltd. 2013
- Received: 4 June 2013
- Accepted: 16 September 2013
- Published: 30 September 2013
Why are metal nanoparticles sol-gel entrapped in ORMOSIL so active and stable? In other words, why ORMOSIL-entrapped metal nanoparticles are more active and selective than many heterogenized counterparts, including silica-entrapped noble metals?
Unveiling specific interactions between MNPs and the molecular structure of ORMOSIL, this work investigates subtle structural aspects through DRIFT spectroscopy.
The results point to interactions between entrapped Pd and Pt nanocrystallites with the organosilica sol-gel cages similar to those taking place in enzymes.
- Heterogeneous catalysis
- Metal nanoparticle
Supported metal nanoparticles (MNPs) catalyze a number of reactions of enormous relevance in the petrochemical industry such as hydrogenation, epoxidation and monomer synthesis . In the last two decades, the use of supported metal nanoparticles in synthetic organic chemistry has been extensively investigated in light of their ability to catalyze a range of chemical reactions , including asymmetric syntheses . The aim was, and is, to apply heterogeneous catalysis to the synthesis of pharmaceutical and fine chemical products, for which the amount of effluent per tonne of product is orders of magnitude higher than that for a commodity chemical . As a results of these efforts a number of new solid catalysts and green chemical processes are slowly being adopted by industry ; despite many remarkable research achievements like, as representative example, Cu ions immobilized on functionalized silica as recyclable and truly heterogeneous catalyst for the homocoupling of terminal alkynes in the presence of oxygen only .
In general, the atomic structure of the exposed surfaces of the active “naked” nanoparticles is made of plentiful unsaturated sites capable to adsorb and catalyze conversion of the reactants . For example, Pd nanoparticles, which are well known for their catalytic activities, can easily aggregate to form Pd-black because of the very high surface energy of palladium . Many efforts have been devoted to develop sinter-proof catalysts using, for example, pre-prepared colloidal metal nanoparticles with tuned size, shape and composition that are then “embedded” by porous support shells .
In principle, the heterogenization of MNPs should prevent the tendency of atoms of “naked” MNPs to aggregate into a bulk material due to their high surface energies, which results in rapid decrease in their intrinsic catalytic activity and selectivity over time . Unfortunately, however, most heterogeneous catalysts reported in the literature, and especially palladium-based catalysts , act as reservoir for MNPs that are leached in solution where they catalyze reaction, but also rapidly aggregate resulting in spent catalyst of poor residual activity.
Sintering is caused by mobility of the metal particles on the support surfaces. Hence, to solve the sintering problem, the encapsulation of the metal nanoparticles within oxide architectures would minimise agglomeration and ensure catalyst recyclability. The validity of this approach was shown, for example, by McFarland and co-workers, comparing the catalytic performance of Pd particles deposited on the outer surface silica (Pd/SiO2), or encapsulated within the silica inner porosity (Pd@SiO2) .
In this context, we have recently introduced a new catalyst series made of Pd and Pt nanocrystals encapsulated in one-step within the sol–gel cages of mesoporous organosilica xerogels. These materials are highly selective mediators in a number of important reactions including carbon-carbon coupling , debenzylation , highly selective hydrogenation of functionalized nitroarenes  and vegetable oils , and hydrosilylation of olefins . Applications are not limited to this broad class of reactions and we are continuing to investigate new reactions and synthetic applications.
Work reported in this account investigates the structural origins of the enhanced performance of these new entrapped metal catalysts by Diffuse Reflectance Infrared Fourier Transform (DRIFT) spectroscopy, which is a powerful spectroscopic technique to investigate the molecular structure of these materials, revealing the subtle structural factors affecting their performance. Surface methods, indeed, are not suitable to investigate these materials due to the sol–gel encapsulation of the active species within the pores of the matrix.
Efficient entrapment of Pd or Pt nanoparticles is achieved by removing the released alcohol, using rotavapor distillation. Classical sol–gel encapsulation based on hydrolytic polycondensation of Si alkoxides releases large amounts of alcohol that rapidly reduce the Pd2+/Pt2+ ions to bulk Pd(0)/Pt(0). The latter metal species are catalytically inactive, as only nanostructured MNPs are able to catalyze reactions, such as Pd nanoparticles mediating C-C coupling reactions .
Textural parameters of Silia Cat Pd 0 and Silia Cat Pt 0 from the N 2 adsorption-desorption isotherms
BET specific surface area (m2/g)
Total pore volume (cm3/g) a
BJH desorption average mesopore diameter (nm) b
Metal loading (mmol/g)
706 ± 4.1
712 ± 2.9
Both structures have a very large surface area, exceeding 700 m2/g. SiliaCat Pd0, however, has significantly lower total pore volume. Accordingly, the average mesopore size is smaller for SiliaCat Pd0, but the size distribution is in either case peaked, pointing to negligible populations of smaller and larger pores.
Assignments of the visible bands in the DRIFT spectra of Silia Cat Pd 0 and Silia Cat Pt 0
Given the high level of methylation of these matrices, it does not come as a surprise that both catalysts are hydrophobic. This is shown by the very weak ν(O-H) band and absence of the δ(HOH) mode, expected at ~1640 cm-1 if any water molecules were adsorbed. The ν(O-H) band is therefore assigned to residual silanol (Si-OH) groups. The very low intensities of this band and of the νSi-O(H) or Si-O- (at ~924 cm-1) bands show that the condensation reactions were extremely efficient. In addition, the high wavenumber of the ν(O-H) band maximum (~3500 cm-1) indicates that the very few silanol groups are not strongly interacting by hydrogen bonds .
The two bands at 2974 and 2914 cm-1 are assigned to the stretching modes (antisymmetric and symmetric, respectively) of the methyl groups bonded to a silicon atom. The corresponding deformation modes appear at 1410 and 1273 cm-1, respectively. The absence of CH2 related bands certifies that hydrolysis of methyltriethoxysilane was complete.
Results of the deconvolution of the 950–1250 cm -1 spectral region of the DRIFT spectra: components’ center in cm -1 and relative areas (in%)
LO center / cm-1
Area ( % )
TO center / cm-1
Area ( % )
Results of the deconvolution of the 700–900 cm -1 spectral region of the DRIFT spectra: components’ center in cm -1 and relative areas (in%)
Band center / cm-1
Band center / cm-1
Accordingly, previous preliminary investigation of the SiliaCat Pd0 structure by solid state NMR  has shown that the degree of cross-linking does not correlate with the catalytic activity.
Therefore, a predominantly six-member network is perfectly compatible with the porous structure found. Given the low content in four-member siloxane rings, the band at ~550 cm-1, which is usually assigned to a coupled mode in these units, must have some contribution from defective structures , possibly associated with Pd(II) and Pt(II) species that were not reduced.
Elimination of ethanol from the alcogel mixture contributes to the very large porosity observed in these hydrogel-derived catalysts. Indeed, the capillary tension at the solid-water cage interface is greatly reduced preventing collapse of the gel during drying . Also, elimination of EtOH favours the Si alkoxide monomers hydrolysis and slows down condensation, so that rapid aggregation of the early sol particles is prevented and MTEOS can fully hydrolyse to CH3-Si(OH)3, which undergoes polycondensation in an open, amorphous structure made predominantly of 6-membered siloxane rings, entrapping Pd or Pt metallic nanophases with the well-known sol–gel stabilization of the nanoparticles.
The spectral region between 700 and 900 cm-1 is more difficult to decompose, given the number of overlapping components with close frequencies. The assignment in this region is not straightforward, because Si-C stretching modes are expected, with different frequencies depending on the local structure .
An interesting feature of these decompositions is that the νsSi-O-Si band is in fact present, although not resolved. The similarity between the two decompositions confirms the resemblance between the molecular structure of the two catalysts.
The atomic dimension and electronegativity of the metal do not influence the main characteristics of the matrix structure: Pt belongs to the same group and to the following period as Pd (it is much larger and with higher electronegativity). Nevertheless, the ORMOSIL morphology and the dispersion of the metal nanophase are quite different. We emphasize herein the relevance of the support embedding structure in guiding and dictating the access of the reactants to the entrapped nanophase. In other words, encapsulation of the metal nanoparticles within the ORMOSIL structures results in materials that are remarkably more active than traditional catalysts; and this generally allows use of an ultralow amount of valued catalyst under conditions that are milder than those of state-of-the-art processes.
For instance, a 0.05 mol% amount of SiliaCat Pd(0) entrapped catalyst can be used to mediate the complete hydrogenation of a wide variety of vegetable oils under hydrogen balloon conditions without cis/trans isomerisation;16 whereas the best Pd catalyst previously known, made of Pd nanoparticles entrapped in the hexagonal porosity of SBA-15 mesoporous silica, mediates less selectively the same conversion at 100°C under 5 atm H2. Similar findings have been reported for most of the catalytic processes catalyzed by the SiliaCat Pd0 and SiliaCat Pt0 mentioned above.
The DRIFT investigation of the molecular structure of ORMOSIL-entrapped metal nanoparticles suggests that the mechanism of action of nanoparticles encapsulated in organosilica is similar to that of enzymes. Once the metal nanoparticles are encapsulated and stabilized within the sol–gel cages, it is the hydrophilic-lipophilic balance (HLB) of the matrix that dictates access and optimal catalysis with unprecedented performance, by promoting preferential adsorption of the lipohilic functional group moieties in reacting substrates adsorbed at the surface of the Pd and Pt nanoparticles in reactions as different as hydrogenation of fats, hydrogenation alkenes and nitroarenes, hydrosilylation of olefins and C-C coupling.
The above mentioned reactions concern very large sectors of the chemical industry, many of which continue to use obsolete catalysts such as Ni Raney (hydrogenation of fats), or Pt/C (hydrogenation of olefins). Sol–gel entrapped metal nanophases will give an immense contribute to simplify those processes, whereas new catalysts are being developed capable to target other relevant reactions.
In a typical preparation, a mixture of methyltriethoxysilane (27 g, 30 mL, 151.4 mmol) and 10 mL of 0.042 M HCl was stirred for 15 minutes. The resulting solution was concentrated with a rotavapor under reduced pressure at 30°C until complete ethanol removal (about 15 minutes). The alcohol-free sol thereby obtained was added with K2PdCl4 (from 0.004 to 0.02 equivalent) dissolved in H2O (from 5 to 10 mL) and 60 mL acetonitrile. This mixture was added with 1 M NaOH (from 0.023 to 0.053 equivalent) to favour gelation that indeed rapidly occurred. The resulting transparent gel was left to dry in air for 4 days after which the xerogel was reduced at room temperature under inert conditions with a solution of sodium triacetoxyborohydride (Pd:Na(AcO)3BH = 1:6 molar ratio) in 80 mL THF, washed with THF and H2O and dried in air to afford a SiliaCat Pd0 catalyst. The metal load in each catalyst was measured using the CAMECA SX100 instrument equipped with EPMA analyzer, a fully qualitative and quantitative method of non-destructive elemental analysis of micron-sized volumes at the surface of materials, with sensitivity at ppm level.
Fourier transform spectroscopy in diffuse reflectance mode was performed in a Mattson RS1 FTIR spectrometer with a Graseby Specac Selector, in the range 400–4000 cm-1, at 4 cm-1 resolution. The analyses were carried out at ambient temperature and pressure, using a powder catalyst sample as received by the catalysts manufacturer (SiliCycle, Inc.). No further treatment of the catalyst was undertaken prior to measurement.
The TEM pictures were obtained in an electron microscope Hitachi H-8100, operated at 200 kV, with a LaB6 filament. The samples were dispersed in ethanol and then dropped onto a Formvar®-coated Cu grid and left to evaporate.
Nitrogen adsorption and desorption isotherms at 77 K were measured using a an ASAP 2020 system from Micromeritics, analyzing the resulting data with the Tristar 3000 software (version 4,01). The desorption branch was used to calculate the pore size distribution.
This paper is dedicated to University of Palermo's Professors Ines Donato and Pasquale Agozzino In memory of a wonderful student trip in 1992, just one gift out of many to their students. Thanks to Mr Simon Bédard from the Quality Control Department of SiliCycle Inc. for his valuable contribution to the adsorption measurements.
- Anderson JA, Garcia MF: Supported Metals in Catalysis. 2005, London (UK): Imperial College PressView ArticleGoogle Scholar
- Astruc D, Lu F, Ruiz Aranzaes J: Nanoparticles as recyclable catalysts: the frontier between homogeneous and heterogeneous catalysis. Angew Chem Int Ed. 2005, 44: 7852-7872. 10.1002/anie.200500766.View ArticleGoogle Scholar
- Barbaro P, Dal Santo V, Liguori F: Emerging strategies in sustainable fine-chemical synthesis: asymmetric catalysis by metal nanoparticles. Dalton Trans. 2010, 39: 8391-8402. 10.1039/c002051f.View ArticleGoogle Scholar
- Busacca CA, Fandrick DR, Song JJ, Senanayake CH: The growing impact of catalysis in the pharmaceutical industry. Adv Synth Catal. 2011, 353: 1825-1864. 10.1002/adsc.201100488.View ArticleGoogle Scholar
- Lucarelli C, Vaccari A: Examples of heterogeneous catalytic processes for fine chemistry. Green Chem. 2011, 13: 1941-1949. 10.1039/c0gc00760a.View ArticleGoogle Scholar
- van Gelderen L, Rothenberg G, Calderone VR, Wilson K, Shiju NR: Efficient alkyne homocoupling catalysed by copper immobilized on functionalized silica. Appl Organomet Chem. 2013, 27: 23-27. 10.1002/aoc.2933.View ArticleGoogle Scholar
- Lee I, Morales R, Albiter MA, Zaera F: Synthesis of heterogeneous catalysts with well shaped platinum particles to control reaction selectivity. Proc Natl Acad Sci U S A. 2008, 105: 15241-15246. 10.1073/pnas.0805691105.View ArticleGoogle Scholar
- Reetz MT, De Vries JG: Ligand-free Heck reactions using low Pd-loading. Chem Commun. 2004, 1559-1563.Google Scholar
- Jia CJ, Schüth F: Colloidal metal nanoparticles as a component of designed catalyst. Phys Chem Chem Phys. 2011, 13: 2457-2487. 10.1039/c0cp02680h.View ArticleGoogle Scholar
- Moulijn JA, van Diepen AE, Kapteijn F: Catalyst deactivation: is it predictable? - What to do?. Appl Catal A Gen. 2001, 212: 3-16. 10.1016/S0926-860X(00)00842-5.View ArticleGoogle Scholar
- Pagliaro M, Pandarus V, Ciriminna R, Beland F, Demma Cara P: Heterogeneous versus Homogeneous Palladium Catalysts for Cross-Coupling Reactions. ChemCatChem. 2012, 4: 432-445. 10.1002/cctc.201100422.View ArticleGoogle Scholar
- Forman AJ, Park JN, Tang W, Hu YS, Stucky GD, McFarland EW: Silica-Encapsulated Pd Nanoparticles as a Regenerable and Sintering-Resistant Catalyst. ChemCatChem. 2010, 2: 1318-1324. 10.1002/cctc.201000015.View ArticleGoogle Scholar
- Pagliaro M, Pandarus V, Béland F, Ciriminna R, Palmisano G, Demma Carà P: A new class of heterogeneous Pd catalysts for synthetic organic chemistry. Catal Sci Technol. 2011, 1: 736-739. 10.1039/c1cy00119a.View ArticleGoogle Scholar
- Pandarus V, Béland F, Ciriminna R, Pagliaro M: Selective Debenzylation of Benzyl Protected Groups with SiliaCat Pd(0) under Mild Conditions. ChemCatChem. 2011, 3: 1146-1150. 10.1002/cctc.201000420.View ArticleGoogle Scholar
- Pandarus V, Ciriminna R, Beland F, Pagliaro M: A new class of heterogeneous platinum catalysts for the chemoselective hydrogenation of nitroarenes. Adv Synth Catal. 2011, 353: 1306-1316. 10.1002/adsc.201000945.View ArticleGoogle Scholar
- Pandarus V, Gingras G, Béland F, Ciriminna R, Pagliaro M: Selective hydrogenation of vegetable oils over SiliaCat Pd(0). Org Process Res Dev. 2012, 16: 1307-1311. 10.1021/op300115r.View ArticleGoogle Scholar
- Ciriminna R, Pandarus V, Gingras G, Béland F, Pagliaro M: Closing the organosilicon synthetic cycle: efficient heterogeneous hydrosilylation of alkenes over SiliaCat Pt(0). ACS Sustainable Chem Engineer. 2013, 1: 249-253. 10.1021/sc3001096.View ArticleGoogle Scholar
- Halsey GD: Physical adsorption on non‒uniform surfaces. J Chem Phys. 1948, 16: 931-937. 10.1063/1.1746689.View ArticleGoogle Scholar
- Gregg SJ, Sing KSW: Adsorption, Surface Area, and Porosity. 1982, New York: Academic Press, 2Google Scholar
- Ciriminna R, Ilharco LM, Fidalgo A, Campestrini S, Pagliaro M: The structural origins of superior performance in sol–gel catalysts. Soft Matter. 2005, 1: 231-237. 10.1039/b506021b.View ArticleGoogle Scholar
- Lin SY, Chang ST: Variations of vibrational local modes and electronic states of hydrogenated amorphous silicon carbide under thermal annealing. J Phys Chem Solids. 1998, 59 (9): 1399-1405. 10.1016/S0022-3697(98)00236-4.View ArticleGoogle Scholar
- Socrates G: Infrared and Raman Characteristic Group Frequencies, Tables and Charts. 2004, Chichester: John Wiley & Sons, 3Google Scholar
- Fidalgo A, Ilharco LM: Chemical tailoring of porous Silica Xerogels: local structure by vibrational spectroscopy. Chem Eur J. 2004, 10: 392-398. 10.1002/chem.200305079.View ArticleGoogle Scholar
- Fidalgo A, Ciriminna R, Ilharco LM, Pagliaro M: Role of the alkyl-alkoxide precursor on the structure and catalytic properties of hybrid sol–gel catalysts. Chem Mater. 2005, 17: 6686-6694. 10.1021/cm051954x.View ArticleGoogle Scholar
- Pandarus V, Béland F, Ciriminna R, Demma Carà P, Pagliaro M: Characterization of Nanostructured SiliaCat Pd(0). Catal Letters. 2012, 142: 213-217. 10.1007/s10562-011-0741-9.View ArticleGoogle Scholar
- Kamyia K, Yoko T, Tanaka K, Takeuchi M: Thermal evolution of gels derived from CH3Si(OC2H5)3 by the sol–gel method. J Non-Cryst Solids. 1990, 121: 182-187. 10.1016/0022-3093(90)90128-9.View ArticleGoogle Scholar
- De Witte BM, Commers D, Uytterhoeven JB: Distribution of organic groups in silica gels prepared from organo-alkoxysilanes. J Non-Cryst Solids. 1996, 202: 35-41. 10.1016/0022-3093(96)00171-8.View ArticleGoogle Scholar
- King S, Bielefeld J: Rigidity percolation in plasma enhanced chemical vapor deposited a-SiC:H Thin Films. ECS Trans. 2010, 3: 185-194.View ArticleGoogle Scholar
- Belkacemi K, Boulmerka A, Arul J, Hamoudi S: Hydrogenation of vegetable oils with minimum trans and saturated fatty acid formation over a new generation of Pd-catalyst. Top Catal. 2006, 37: 113-120. 10.1007/s11244-006-0012-y.View ArticleGoogle Scholar
This article is published under license to BioMed Central Ltd. This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/2.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.