Skip to main content
  • Preliminary communication
  • Open access
  • Published:

Green synthesis of a typical chiral stationary phase of cellulose-tris(3, 5-dimethylphenylcarbamate)

Abstract

Background

At present, the study on the homogeneous-phase derivatization of cellulose in ionic liquid is mainly focused on its acetylation. To the best of our knowledge, there has been no such report on the preparation of cellulose-tris(3,5-dimethylphenylcarbamate) (CDMPC) with ionic liquid 1-allyl-3-methyl-imidazolium chloride (AmimCl) so far.

Results

With ionic liquid 1-allyl-3-methylimidazolium chloride (AmimCl) as a reaction solvent, cellulose-tris(3,5-dimethylphenylcarbamate) (CDMPC) was synthesized by the reaction of 3,5-dimethylphenyl isocyanate and soluble microcrystalline cellulose in a homogeneous phase. The synthesized CDMPC was then coated onto the surfaces of aminopropyl silica gel to prepare a chiral stationary phase (CSP). The prepared CSP was successfully used in chiral separation of seven racemic pesticides by high performance liquid chromatography (HPLC). Good chiral separation was obtained using n-hexane and different modifiers as the mobile phases under the optimal percentage and column temperature, with the resolution of metalaxyl, diniconazole, flutriafol, paclobutrazol, hexaconazole, myclobutanil and hexythiazox of 1.73, 1.56, 1.26, 1.00, 1.18, 1.14 and 1.51, respectively. The experimental results suggested it was a good choice using a green solvent of AmimCl for cellulose functionalization.

Conclusion

CDMPC was successfully synthesized as the chiral selector by reacting 3, 5-dimethylphenyl isocyanate with dissolved microcrystalline cellulose in a green ionic liquid of AmimCl.

Findings

Enantioseparation is an effective approach in the determination of purity of enantiomers and preparation of a single enantiomer in the research fields, such as chiral drugs, natural products, and agricultural chemicals [1]. The key in the chiral technique is the design and application of chiral stationary phases (CSPs) [2–5]. At present, the polysaccharide derivatives, especially benzoate and phenylcarbamate derivatives of cellulose and starch, are most popular CSPs for direct separation of enantiomers with HPLC due to their strong chiral recognition capability [6–9]. Generally, the synthesis of cellulose benzoates started from cellulose suspension in pyridine and carried out heterogeneously. Ionic liquid is an organic salt in the form of liquid under normal temperature, which has attracted wide attention from the chemistry community for its advantages of low melting point, non-volatility, and adjustable structure and property, etc. [10–12]. Recently, Swatloski et al. found that 1-butyl-3-methylimidazolium chloride (BmimCl) ionic liquid was able to dissolve cellulose [13], which opened a new field for the study and development of cellulose solvent system. Wu et al., not only proved 1-allyl-3-methylimidazolium chloride (AmimCl) to be a good solvent for cellulose, but also successfully synthesized cellulose acetate in it [14]. At present, the study on the homogeneous-phase derivatization of cellulose in an ionic liquid is mainly focused on its acetylation. There has been no report on the esterification of cellulose in an ionic liquid of AmimCl so far.

In this study, CDMPC, as a chiral selector, was firstly prepared in an ionic liquid of AmimCl, followed by the characterization of FTIR, 1HNMR and elementary analysis. After it was coated on the surfaces of silica gel and packed into a chromatographic steel column, seven racemic pesticides including diniconazole, flutriafol, paclobutrazol, myclobutanil, hexaconazole, metalaxyl and hexythiazox, were selected for the chromatographic evaluation of enantioselective ability in normal- phase HPLC.

Experiment

Equipments and reagents

Chromatographic measurements were made on a Agilent 1100 HPLC system (Agilent Technologies, Inc., Walbronn, Germany) equipped with a quaternary pump, a vacuum degasser module, a Rheodyne 7725i injector with a 20 Î¼L sample loop, a temperature controlled column compartment and a variable wavelength UV detector. FTIR spectra were recorded in the range 400–4000 cm−1 with 4 cm−1 resolution with a BRUKER TENSOR27 system (Bruker Scientific Technology Co. Ltd., Karlsruhe, Germany). The 400 MHz 1H NMR spectra were measured on a BRUKER ARX 400 spectrometers (Bruker Scientific Technology Co. Ltd., Karlsruhe, Germany).

AmimCl was purchased from Shanghai Cheng Jie Chemical Co. Ltd. (Shanghai, China). 5 Î¼m spherical silica gel (Kromasil, pore size 10 nm) was purchased from Akzo Noble N.V. (Nacka, Sweden). Microcrystalline cellulose (Avicel, DP = 200), tetrahydrofuran (THF), 3-aminopropyltriethoxysilane and 3, 5-dimethylphenyl isocyanate were purchased from Aladdin Chemistry Co. Ltd. (Shanghai, China). Diniconazole (97.4%), flutriafol (97%), paclobutrazol (97.4%) and myclobutanil (98%) were provided by Hunan Research Institute of Chemical Industry, hexaconazole (95%), metalaxyl (98%) and hexythiazox (98%)were provided by Hunan Institute for Food and Drug Control.

Synthesis of CDMPC in AmimCl

Synthesis of CDMPC was carried out according to the previous report [15], but the great difference was that an ionic liquid of AmimCl was used instead of traditional pyridine solvent.

As shown in Figure 1, 1.00 g of dry microcrystalline cellulose was transferred into a 100 ml three-neck flask, and the flask was added with 34.00 g of AmimCl (1). The solution was stirred magnetically for dissolution (90°C, 3 h). The flask was added with 10.00 mL of 3, 5-dimethylphenyl isocyanate (2), then the solution was refluxed for 48 h. The whole process was conducted under the protection of N2. After the solution was cooled down, it was added with 800 ml of methanol. The sediment was washed with 200 ml of methanol, and then dried for 12 h under vacuum at 80°C. 2.93 g of white solid of CDMPC was produced with a yield of 79.19%.

Figure 1
figure 1

Synthesis of CDMPC in AmimCl.

Preparation of CDMPC-coated CSP

CDMPC-coated CSP was prepared according to the published reference [16]. Firstly, 3.00 g of silica gel was transferred into toluene, and sufficiently reacted with 3- aminopropyltriethoxysilane at 110°C for 48 h to obtain aminopropyl-silica gel (APS). Secondly, 0.45 g of the synthesized CDMPC was weighed and dissolved in 30 mL of tetrahydrofuran. Then the solution was added to 2.55 g of APS, and dried for 8 h (60°C, vacuum condition) after the solvent was removed under vacuum at room temperature. A CDMPC-coated CSP with coating quantity of 15% was thus prepared.

Column packing

With isopropanol as slurry solvent and the mixture of n-hexane/isopropanol (90/10, v/v) as displacement fluid, the CDMPC-coated CSP was filled into the stainless-steel column (250 mm × 4.6 mm) under a pressure of 7000 psi.

Results and discussion

Characterization of CDMPC

FTIR spectra of microcrystalline cellulose and CDMPC were compared in Figure 2. The spectrum of CDMPC had a significantly weaker -OH absorption peak at 3415.31 cm-1, suggesting that the -OH groups of cellulose were mostly replaced. Peak at 2902.34 cm-1 stands for the stretching vibration peak of -CH3 group, the absorption peaks of the benzene ring appeared at 1616.06 cm-1, 1544.70 cm-1 and 1455.99 cm-1, the absorption peak of the carbonyl group was found at 1737.55 cm-1. These all suggest that the -OH groups on microcrystalline cellulose have reacted with 3, 5-dimethylphenyl isocyanate.

Figure 2
figure 2

FTIR spectra of cellulose and CDMPC. â‘  Cellulose, â‘¡ CDMPC.

The obtained CDMPC was also determined by the 1H NMR (400 MHz, 50°C, DMSO-d6). As shown in Figure 3, the chemical shifts (δ, ppm) could be observed at different positions of 8.5-8.9 (N-H), 6.3-7.1 (Ar-H), 3.5-5.1 (Glucose-H), 1.8-2.2 (Ar-CH3).

Figure 3
figure 3

NMR spectrum of CDMPC.

From the molecular formula of CDMPC (C33H37O8N3), its theoretical components of each element are C 65.70%, H 6.18% and N 6.96%, respectively. In contrast, the measured components of CDMPC by elemental analysis are C 64.40%, H 6.26% and N 6.73%. The comparable results showed no obvious difference of element content was found, suggesting that CDMPC was successfully synthesized by the developed method.

Chromatographic evaluation for the coated CSPs

Diniconazole, flutriafol, paclobutrazol and hexaconazole all contain benzene rings and hydroxyls in their molecular structures, hexythiazox and metalaxyl contain benzene rings and carbonyls in their molecular structures, myclobutanil, diniconazole, paclobutrazol and hexaconazole contain chlorphenyls and 1, 2, 4-triazolyls in their molecules. The above groups may have dipole-dipole interaction, hydrogen bond interaction and Ï€-Ï€ interaction with the stationary phases. Generally, the polarity of mobile phase can be changed by changing the alcohol ratio in mobile phase, which in turn affects the retention time and resolution in enantioseparation [17]. In order to preliminarily study the separation effects of seven racemic pesticides and investigate the impact of polarity on separation, we selected isopropanol as the polar modifier. The impact of modifier (isopropanol/ethanol) and separation temperature on the retention time and stereo selectivity of enantiomer separation of 7 racemic pesticides on the self-made CDMPC chiral column were investigated in detail. When n-hexane/isopropanol (98/2, v/v) were used as the mobile phases with a flow rate of 1.0 ml/min at 25°C, the resolution of paclobutrazol, hexaconazole and hexythiazox was 1.00, 1.18 and 1.51, respectively, the resolution of diniconazole was 1.56 when n-hexane/isopropanol (80/20, v/v) were used as the mobile phases at 25°C, the resolution of flutriafol was 1.26 when n-hexane/isopropanol (95/5, v/v) were used as the mobile phases at 20°C, the resolution of myclobutanil was 1.14 when n-hexane/isopropanol (85/15, v/v) were used as the mobile phases at 25°C, the resolution of metalaxyl was 1.73 when n-hexane/ethanol (95/5, v/v) were used as the mobile phases at 25°C. The optimal separation chromatograms of 7 racemic pesticides were shown in Table 1 and Figure 4.

Figure 4
figure 4

Optimal chromatograms of the selected pesticides and their molecular structures. Pesticide identification: (a) metalaxyl, (b) flutriafol, (c) diniconazole, (d) paclobutrazol, (e) hexaconazole, (f) hexythiazox, (g) myclobutanil.

Table 1 The resolutions under optimized conditions

The direct enantioseparation of seven pesticides has been achieved, demonstrating the high chiral recognition abilities for the coated CDMPC in chiral HPLC. Good chiral separation was probably attributed to the hydrogen bond interaction, dipole-dipole interaction and π-π interaction between the CSPs and the recognized analyte [18].

Conclusions

With the green solvent of AmimCl as a homogenous reaction medium, CDMPC was successfully prepared by the reaction of 3, 5-dimethylphenyl isocyanate with soluble microcrystalline cellulose. Its chemical structure was further proved by the FTIR, 1HNMR and elementary analysis. The prepared CDMPC-coated CSPs was successfully used in chiral separation of seven pesticides by HPLC. Seven racemic pesticides were well separated under the optimized chromatographic conditions. It suggested that it was a good alternative to synthesize the selector in the presence of a low-cost, environmentally friendly cellulose solvent.

Description of additional material

The synthetic method of CDMPC by reacting 3, 5-dimethylphenyl isocyanate with dissolved microcrystalline cellulose in a green ionic liquid of AmimCl are available. The data characterization of FTIR, 1HNMR and elemental analysis are also available.

Abbreviations

CDMPC:

Cellulose-tris(3,5-dimethylphenylcarbamate)

AmimCl:

1-allyl-3-methyl-imidazolium chloride

CSPs:

Chiral stationary phase

HPLC:

High performance liquid chromatography

THF:

Tetrahydrofuran

APS:

Aminopropyl-silica gel.

References

  1. Musharraf SG, Shoaib M, Najam-ul-Haq M: Validated TLC-densitometry method for the simultaneous analysis of pyrethroid insecticides in agricultural and domestic products. Chem Cent J. 2012, 6: 93-97. 10.1186/1752-153X-6-93.

    Article  CAS  Google Scholar 

  2. Waghorn GC, McNabb WC: Consequences of plant phenolic compounds for productivity and health of ruminants. P Nutr Soc. 2003, 62: 383-392. 10.1079/PNS2003245.

    Article  CAS  Google Scholar 

  3. Chankvetadze B, Yamamoto C, Okamoto Y: Enantioseparation of selected chiral sulfoxides using polysaccharide-type chiral stationary phases and polar organic, polar aqueous–organic and normal-phase eluents. J Chromatogr A. 2001, 922: 127-137. 10.1016/S0021-9673(01)00958-X.

    Article  CAS  Google Scholar 

  4. Loukotkova L, Rambouskova ME, Bosakova Z, Tesarova E: Cellulose tris(3,5-dimethylphenylcarbamate)-based chiral stationary phases as effective tools for enantioselective HPLC separation of structurally different disubstituted binaphthyls. Chirality. 2008, 20: 900-909. 10.1002/chir.20585.

    Article  CAS  Google Scholar 

  5. Franco P, Minguillón C, Oliveros L: Solvent versatility of bonded cellulose-derived chiral stationary phases for high-performance liquid chromatography and its consequences in column loadability. J Chromatogr A. 1998, 793: 239-247. 10.1016/S0021-9673(97)00935-7.

    Article  CAS  Google Scholar 

  6. Meidan Y: Chiral drug analysis. Chem Eng News. 1990, 68: 38-

    Google Scholar 

  7. Bae I, Park JH, Choi SH: Synthesis of chiral stationary phase via surface‒initiated atom transfer radical polymerization of vinylated cellulose 3, 5‒dimethylphenylcarbamate. Polym Int. 2011, 60: 833-838. 10.1002/pi.3027.

    Article  CAS  Google Scholar 

  8. Oliveros L, Senso A, Minguillon C: Benzoates of cellulose bonded on silica gel: Chiral discrimination ability as high‒performance liquid chromatographic chiral stationary phases. Chirality. 1997, 9: 145-149. 10.1002/(SICI)1520-636X(1997)9:2<145::AID-CHIR12>3.0.CO;2-N.

    Article  CAS  Google Scholar 

  9. Bai LY, Zhang YP, Deng PH, Zhang YJ, Chen J: Enantioseparation of typical pesticides using cellulose carbamate stationary phases by capillary liquid chromatography. Asian J Chem. 2012, 24: 4917-4922.

    Google Scholar 

  10. Zhang JM, Wu J, Cao Y, Sang SM, Zhang J, He JS: Synthesis of cellulose benzoates under homogeneous conditions in an ionic liquid. Cellulose. 2009, 16: 299-308. 10.1007/s10570-008-9260-2.

    Article  CAS  Google Scholar 

  11. Wilkes JS: A short history of ionic liquids—from molten salts to neoteric solvents. Green Chem. 2002, 4: 73-80. 10.1039/b110838g.

    Article  CAS  Google Scholar 

  12. Ananda S: Amarasekara, Onome S, Owereh: Homogeneous phase synthesis of cellulose carbamate silica hybrid materials using 1-n-butyl-3-methylimidazolium chloride ionicliquid medium. Carbohyd Polym. 2009, 78: 635-638. 10.1016/j.carbpol.2009.05.032.

    Article  Google Scholar 

  13. Swatloski RP, Spear SK, Holbrey JD, Rogers RD: Dissolution of cellose with ionic liquids. J Am Chem Soc. 2002, 124: 4974-4975. 10.1021/ja025790m.

    Article  CAS  Google Scholar 

  14. Wu J, Zhang J, Zhang H, He JS, Ren Q, Guo ML: Homogeneous acetylation of cellulose in a new ionic liquid. Biomacromolecules. 2004, 5: 266-268. 10.1021/bm034398d.

    Article  CAS  Google Scholar 

  15. Cao Y, Zhang J, He JS, Li HQ, Zhang Y: Homogeneous Acetylation of Cellulose at Relatively High Concentrations in an Ionic Liquid. Chinese J Chem Eng. 2010, 18: 515-522. 10.1016/S1004-9541(10)60252-2.

    Article  CAS  Google Scholar 

  16. Okamoto Y, Kaida Y: Resolution by high-performance liquid chromatography using polysaccharide carbamates and benzoates as chiral stationary phases. J Chromatogr A. 1994, 666: 403-419. 10.1016/0021-9673(94)80400-1.

    Article  CAS  Google Scholar 

  17. O'Brien T, Crocker L, Thompson R, Thompson K, Toma PH, Conlon DA, Feibush B, Moeder C, Bicker G, Grinberg N: Mechanistic aspects of chiral discrimination on modified cellulose. Anal Chem. 1997, 69: 1999-2007. 10.1021/ac961241l.

    Article  Google Scholar 

  18. Wang P, Jiang SR, Liu DH, Wang P, Zhou ZQ: Direct enantiomeric resolutions of chiral triazole pesticides by high-performance liquid chromatography. J Biochem Biophys Meth. 2005, 62: 219-230. 10.1016/j.jbbm.2004.11.007.

    Article  CAS  Google Scholar 

Download references

Acknowledgements

The financial supports by the National Natural Science Foundation of China (Nos. 30070506 and 30771436) are gratefully acknowledged.

Author information

Authors and Affiliations

Authors

Corresponding authors

Correspondence to Lian-yang Bai or Yu-Ping Zhang.

Additional information

Competing interests

The authors declare that they have no competing interests.

Authors’ contributions

BLY and ZYP initiated and designed the study. All authors contributed to data analyses and to finalizing the manuscript. All authors have read and approved the final version.

Authors’ original submitted files for images

Rights and permissions

Open Access This article is distributed under the terms of the Creative Commons Attribution 2.0 International License ( https://creativecommons.org/licenses/by/2.0 ), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Reprints and permissions

About this article

Cite this article

Liu, RQ., Bai, Ly., Zhang, YJ. et al. Green synthesis of a typical chiral stationary phase of cellulose-tris(3, 5-dimethylphenylcarbamate). Chemistry Central Journal 7, 129 (2013). https://doi.org/10.1186/1752-153X-7-129

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI: https://doi.org/10.1186/1752-153X-7-129

Keywords